Thermal interface materials (TIMs), as typical thermal functional materials, are highly required to possess both high thermal conductivity and low Young's modulus. However, the naturally synchronized change in the thermal and mechanical properties seriously hinders the development of high-performance TIMs. To tackle such a dilemma, a strategy of codoping solid fillers and liquid metal fillers into polymer substrates is proposed in this study. This strategy includes a large amount of liquid metals that play the role of thermal paths and a small amount of uniformly dispersed solid fillers that further enhance heat conduction. Through the synergistic effect of the liquid metal and solid fillers, the thermal conductivity can be improved, and Young's modulus can be kept small simultaneously. A typical TIM with a volume of 55% gallium-based liquid metal and 15% copper particles as fillers has a thermal conductivity of 3.94 W/(m·K) and a Young's modulus of 699 kPa, which had the maximum thermomechanical performance coefficient compared with liquid metal TIMs and solid filler-doped TIMs. In addition, the thermal conductivity of the solid-liquid metal codoped TIM increased sharply with an increase of liquid metal content, and Young's modulus increased rapidly with an increase of the volume ratio of copper and polymer. The high-low-temperature cycling test and large-size light-emitting diode (LED) application demonstrated that this TIM had stable physical performance. The synergistic effect of the solid fillers and liquid metal fillers provides a broad space to solve the classic tradeoff issue of the mechanical and thermal properties of composites.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.2c20713 | DOI Listing |
ACS Nano
January 2025
Department of Chemistry, School of Science and Key Laboratory for Quantum Materials of Zhejiang Province, Research Center for Industries of the Future, Westlake University, Hangzhou 310030, China.
In our previous studies of metal nanoparticle growth, we have come to realize that the dynamic interplay between ligand passivation and metal deposition, as opposed to static facet control, is responsible for focused growth at a few active sites. In this work, we show that the same underlying principle could be applied to a very different system and explain the abnormal growth modes of liquid nanoparticles. In such a liquid active surface growth (LASG), the interplay between droplet expansion and simultaneous silica shell encapsulation gives rise to an active site of growth, which eventually becomes the long necks of nanobottles.
View Article and Find Full Text PDFMikrochim Acta
January 2025
Institute of Chemical Engineering, Guangdong Academy of Sciences, Guangzhou, 510665, People's Republic of China.
A simple and rapid colorimetric detection strategy, based on hydrogen bond identification of 6-thioguanine (6-TG) functionalized Au nanoparticles (AuNPs), is proposed for highly selective and sensitive determination of kanamycin (KA). In this strategy, the hydrogen bond interaction between 6-TG and kanamycin induces AuNPs to agglomerate, with a consequent color change of AuNPs from wine red to purple or even blue. The kanamycin concentrations can be quantified by employing UV-vis spectrophotometer.
View Article and Find Full Text PDFChemistry
January 2025
Indian Institute of Science Education and Research (IISER), Chemistry, Dr. Homi Bhabha Road, Pashan, 411008, Pune, INDIA.
Metal-organic frameworks (MOFs) are a fascinating class of structured materials with diverse functionality originating from the distinctive physicochemical properties. This review focuses on the specific chemical design of geometrically frustrated MOFs along with the origin of the intriguing magnetic properties. We have discussed the arrangement of spin centres (metal and ligand) which are responsible for the unusual magnetic phenomena in MOFs.
View Article and Find Full Text PDFRSC Adv
January 2025
Department of Chemistry, Institute of Technical Education and Research, Siksha 'O' Anusandhan Deemed to Be University Bhubaneswar-751030 Odisha India
The widespread use of neodymium-iron-boron (NdFeB) magnets has raised concerns about the environmental impact of their disposal, prompting the need for sustainable recycling strategies. Traditional solvents used in recycling are toxic and flammable, making them risky to use. Ionic liquids are safer and greener options with low vapor pressure, high stability, and less flammability.
View Article and Find Full Text PDFChemistry
January 2025
Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Leninsky Prospekt 47, 119991, Moscow, RUSSIAN FEDERATION.
Palladium catalysts form a cornerstone of modern chemistry with upmost scientific and industrial impact. Bulk palladium metal itself is chemically inert, and a sequence of chemical transformations has to be utilized to convert the metal into Pd pre-catalyst covered by ligands. However, the "cocktail" of catalysis concept discovered recently has shown that Pd systems can efficiently operate in catalysis without the necessity of a complicated and expensive pre-installed ligand environment.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!