Polyolefins compose the majority of plastic waste, but conventional mechanical recycling degrades their properties, thereby reducing their value. We report the functionalization of a model for dehydrogenated polyethylene, polycyclooctene (PCOE), with thiol-ene click chemistry to install pendant hydroxyl ethyl thioethers. Functionalization of PCOE using mercaptoethanol via thiol-ene click chemistry yielded functionalization between 1.4 and 22.9% based on ethylene monomeric units. Reactions were well-controlled by varying the reagent stoichiometry and reaction time. Crystallinity and melting temperature decreased, and glass transition temperature increased with greater functionalization. Contact angle measurements reveal an increase in surface polarity with functionalization. Comparisons with poly(ethylene--vinyl alcohol) (EVOH) show comparable surface polarity at similar levels of alcohol functionalization. At 12% functionalization, the ultimate shear stress (USS) of functionalized PCOE in an adhesive configuration is 4.10 ± 0.48 MPa, comparable to EVOH. At >12% functionalization, the failure mode changed from adhesive to mixed adhesive-cohesive, and the USS decreased.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsmacrolett.2c00670 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Click chemistry-driven asymmetrically modified superhydrophobic/superhydrophilic gelatin sponge for improved dry socket prophylaxis.
Int J Biol Macromol
January 2025
Department of Oral and Maxillofacial Surgery, School and Hospital of Stomatology, Cheeloo College of Medicine, Shandong University & Shandong Key Laboratory of Oral Tissue Regeneration & Shandong Engineering Research Center of Dental Materials and Oral Tissue Regeneration & Shandong Provincial Clinical Research Center for Oral Diseases, Ji'nan 250012, China. Electronic address:
Dry socket, a common painful complication after tooth extraction, is typically caused by improper blood clot formation or its premature dislodgement, often exacerbated by bacterial infections. Traditional gelatin sponges, widely used as clinical fillers, provide favorable biocompatibility and hemostatic support but suffer from suboptimal hemostatic efficiency, lack of antimicrobial properties, and insufficient anticoagulant factors, which increase the risk of dry socket. Addressing these limitations, a novel tannic acid cross-linked gelatin sponge has been developed using directional lyophilization.
View Article and Find Full Text PDFPhotoinitiated Thiol-Ene Click Reaction for Preparation of Highly Adhesive and Mechanically Stable Silicone Coatings for Marine Antifouling and Anticorrosion.
ACS Appl Mater Interfaces
January 2025
Tianjin Key Laboratory for Marine Environmental Research and Service, School of Marine Science and Technology, Tianjin University, Tianjin 300072, China.
Marine biofouling and corrosion have become the main problems affecting the development of the marine industry. Silicone-based coatings have been widely used for antifouling and anticorrosion due to their low surface energy. However, the poor adhesion and low mechanical stability of these materials limit their application in complex marine environments.
View Article and Find Full Text PDFEnhancing the interactions of ion-tagged oligonucleotides and magnetic ionic liquid supports for the sequence-specific extraction of hepatitis B virus DNA.
Anal Chim Acta
February 2025
Department of Chemistry, Iowa State University, Ames, IA, 50011, USA. Electronic address:
Background: Infections from the hepatitis B virus (HBV) are a major risk factor for hepatocellular carcinoma, one of the most common types of liver cancer. Circulating cell-free DNA (ccfDNA) in human plasma can be used as a non-invasive biomarker for diagnosing HBV-related liver diseases. The isolation of target ccfDNA sequences is often challenging due to the co-extraction of highly abundant non-target DNA from samples.
View Article and Find Full Text PDFOrganic/Inorganic Hybrid Cross-Linked Gel Polymer Electrolyte for Optimizing the Solvation Structure of Lithium Ions.
ACS Appl Mater Interfaces
January 2025
Guangdong Key Laboratory for Hydrogen Energy Technologies, School of Materials and Energy, Foshan University, Foshan 528000, PR China.
Lithium metal electrodes inevitably lead to the decomposition of the liquid electrolyte and lithium dendrite growth, both of which result in the formation of unstable solid electrolyte intermediates (SEIs). Gel polymer electrolytes (GPEs) are expected to replace liquid electrolytes for optimizing the SEI issues of lithium metal. Herein, a cellulose-based gel electrolyte cross-linked by thiol-modified polyhedral oligomeric silsesquioxane (thiol-modified-POSS) was successfully obtained based on "thiol-ene" click chemistry.
View Article and Find Full Text PDFClick Chemistry as an Efficient Toolbox for Coupling Sterically Hindered Molecular Systems to Obtain Advanced Materials for Nanomedicine.
Int J Mol Sci
December 2024
Materials Research Institute, Universidad Nacional Autónoma de México, Mexico City 04510, Mexico.
Since its conceptualization, click chemistry in all its variants has proven to be a superior synthesis protocol, compared to conventional methods, for forming new covalent bonds under mild conditions, orthogonally, and with high yields. If a term like reactive resilience could be established, click reactions would be good examples, as they perform better under increasingly challenging conditions. Particularly, highly hindered couplings that perform poorly with conventional chemistry protocols-such as those used to conjugate biomacromolecules (e.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!