In this study, the effect of ultrasound processing on the properties of two packages widely used in food products was evaluated: polyamide (PA) and polyethylene (PE) multilayer packaging. Packages composed of PE/PA/PE (Film A) and PE/PA/PE/PA/PE (Film B) were filled with aqueous and fatty food simulants and treated in an ultrasound water bath (frequency 25 kHz, volumetric power of 9.74 W/L, temperature of 25 °C, and time of 30 and 60 min). Materials were evaluated in term of structure and performance properties. Ultrasound did not or induced small changes in chemical groups, crystallinity, melting temperature, and tensile strength of the films. Film A showed a reduction in heat sealing tensile strength of 25% in the machine direction and 22% in the transverse direction. Film B showed a 20% increase of water vapor transmission rate after ultrasound processing. Although ultrasound had little impact on the properties of the evaluated materials, these modifications do not compromise the use of these packages for applications in ultrasound-processed foods. Therefore, the results indicate that ultrasound can be used as a food processing technology in multilayer PA and PE packaging.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.foodres.2022.112217 | DOI Listing |
Heliyon
January 2025
Department of Food Science and Technology, College of Agriculture, Isfahan University of Technology, 84156-83111, Isfahan, Iran.
Packaging films based on natural biopolymers often suffer from inadequate barrier and mechanical properties. To address these challenges, multilayer films have emerged as potential solutions. In this study, we prepared bilayer films using bitter vetch seed protein (BVSP) and polylactic acid (PLA).
View Article and Find Full Text PDFMolecules
January 2025
Polymer Processing Division, Institute of Materials Technology, Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland.
Packaging materials mainly serve the function of protecting products. The most common representative of this group is poly(ethylene terephthalate) (PET), which is not biodegradable and therefore, its waste might be burdensome to the environment. Thus, this work aims to develop outlines for obtaining polyester-based systems, preferably biobased ones, intended for the packaging industry and their detailed characterization.
View Article and Find Full Text PDFFood Chem
January 2025
Laboratory of Agricultural and Food Biophysics, Institute of Biophysics, College of Science, Northwest A&F University, Yangling, Shaanxi 712100, China; Laboratory of Muscle Biology and Meat Science, National Beef Cattle Improvement Center, College of Animal Science and Technology, Northwest A&F University, Yangling, Shaanxi 712100, China; Laboratory of Meat Quality Analysis and Products Development, Ningxia Xihaigu Institute of High-end Cattle Industry, Haiyuan, Ningxia 755299, China. Electronic address:
Multifunctional pH-responsive films were fabricated via layer-by-layer deposition of gelatin, chitosan, and carboxymethyl cellulose (CMC), incorporating selenium nanoparticles (SeNPs) and beetroot extract (BTE), to monitor and preserve beef freshness. SeNPs were synthesized and characterized via various techniques. BTE exhibited promising functional properties, and films demonstrated a significant color transition from red to yellow across pH 2-14.
View Article and Find Full Text PDFMater Adv
December 2024
Cardiff University School of Pharmacy and Pharmaceutical Sciences, Redwood Building King Edward VII Ave Cardiff CF10 3NB UK
Urinary catheters are commonly used in medical practice to drain and monitor urine of patients. However, urinary catheterisation is associated with the risk of developing catheter-associated urinary tract infections (CAUTIs), which can result in life-threatening sepsis that requires antibiotics for treatment. Using the layer-by-layer (LbL) technique, we assembled a multilayer catheter comprising nine quadruple layers (9QL) of alginate, chlorhexidine (CHX), alginate and poly(β-amino ester) (PBAE) built upon an amino-functionalised silicone.
View Article and Find Full Text PDFMar Pollut Bull
January 2025
Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003, USA.
Microplastics (MPs) in nature inevitably undergo various aging processes and may exhibit varied interfacial interactions with the coexisted contaminants. Here several discarded disposable polyethylene and polypropylene plastic packaging materials were collected and employed as the raw materials of MPs, and the effects of stimulated UV irradiation and microbial colonization on the variations of surface physicochemical characteristics, including biofilm content, oxygen-containing functional groups, oxygen/carbon ratio, hydrophilicity and surface charge properties were explored. Simultaneously, the adsorption behavior of each MPs on the representative cationic dye crystal violet (CV), as well as the influences of salinity and pH of CV solution, was investigated.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!