Vaporizable endoskeletal droplets are solid hydrocarbons in liquid fluorocarbon droplets in which melting of the hydrocarbon phase leads to the vaporization of the fluorocarbon phase. In prior work, vaporization of the endoskeletal droplets was achieved thermally by heating the surrounding aqueous medium. In this work, we introduce a near-infrared (NIR) optically absorbing naphthalocyanine dye (zinc 2,11,20,29-tetra--butyl-2,3-naphthalocynanine) into the solid hydrocarbon (eicosane, -CH) core of liquid fluorocarbon (CF) drops suspended in an aqueous medium. Droplets with a uniform diameter of 11.7 ± 0.7 μm were formed using a flow-focusing microfluidic device. The solid hydrocarbon formed a crumpled spherical structure within the liquid fluorocarbon droplet. The photoactivation behavior of these dye-containing endoskeletal droplets was investigated using NIR laser irradiation. When exposed to a pulsed laser of 720 nm wavelength, the dye-containing droplets vaporized at an average laser fluence of 65 mJ/cm, whereas blank droplets without the dye did not vaporize at any fluence up to 100 mJ/cm. Furthermore, dye-loaded droplets with a smaller, polydisperse size distribution were prepared using a simple shaking method and studied in a flow phantom for their photoacoustic signal and ultrasound contrast imaging. These results demonstrate that dye-containing endoskeletal droplets can be made to vaporize by externally applied optical energy. Such droplets may be useful for a variety of photoacoustic applications for sensing, imaging, and therapy.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acs.langmuir.2c02320 | DOI Listing |
Langmuir
January 2023
Department of Mechanical Engineering, University of Colorado, Boulder, Colorado80309, United States.
Vaporizable endoskeletal droplets are solid hydrocarbons in liquid fluorocarbon droplets in which melting of the hydrocarbon phase leads to the vaporization of the fluorocarbon phase. In prior work, vaporization of the endoskeletal droplets was achieved thermally by heating the surrounding aqueous medium. In this work, we introduce a near-infrared (NIR) optically absorbing naphthalocyanine dye (zinc 2,11,20,29-tetra--butyl-2,3-naphthalocynanine) into the solid hydrocarbon (eicosane, -CH) core of liquid fluorocarbon (CF) drops suspended in an aqueous medium.
View Article and Find Full Text PDFNat Commun
February 2022
Paul M. Rady Department of Mechanical Engineering, University of Colorado, Boulder, CO, 80309, USA.
Manipulation of micro/nano particles has been well studied and demonstrated by optical, electromagnetic, and acoustic approaches, or their combinations. Manipulation of internal structure of droplet/particle is rarely explored and remains challenging due to its complicated nature. Here we demonstrated the manipulation of internal structure of disk-in-sphere endoskeletal droplets using acoustic wave.
View Article and Find Full Text PDFLangmuir
March 2022
Paul M. Rady Department of Mechanical Engineering, University of Colorado, Boulder, Colorado 80309, United States.
Vaporizable hydrocarbon-in-fluorocarbon endoskeletal droplets are a unique category of phase-change emulsions with interesting physical and thermodynamic features. Here, we show microfluidic fabrication of various morphologies, such as solid-in-liquid, liquid-in-solid, and Janus-type, of complex solid -CH or -CH and liquid -CF droplets. Furthermore, we investigated the vaporization behavior of these endoskeletal droplets, focusing on the effects of heat treatment and core size.
View Article and Find Full Text PDFCurr Opin Colloid Interface Sci
December 2020
Biomedical Engineering, Mechanical Engineering, University of Colorado, Boulder, USA.
Acoustic nanodrops are designed to vaporize into ultrasound-responsive microbubbles, which presents certain challenges nonexistent for conventional nano-emulsions. The requirements of biocompatibility, vaporizability and colloidal stability has focused research on perfluorocarbons (PFCs). Shorter PFCs yield better vaporizability via their lower critical temperature, but they also dissolve more easily owing to their higher vapor pressure and solubility.
View Article and Find Full Text PDFSci Adv
April 2020
Department of Mechanical Engineering, University of Colorado, 1111 Engineering Dr., Boulder, CO 80309, USA.
Liquid emulsion droplet evaporation is of importance for various sensing and imaging applications. The liquid-to-gas phase transformation is typically triggered thermally or acoustically by low-boiling point liquids, or by inclusion of solid structures that pin the vapor/liquid contact line to facilitate heterogeneous nucleation. However, these approaches lack precise tunability in vaporization behavior.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!