Photonics-based technologies are key players in a number of emerging applications in the terahertz (THz) field. These solutions exploit the well-known advantages of optical devices, such as ultra-wide tuneability and direct integration with fiber networks. However, THz receivers are mainly implemented by fully electronic solutions, where Schottky barrier diodes (SBD) are the preferred option as detectors and mixers due to their excellent response within the THz range at room temperature, and technological maturity. Here, we demonstrate an SBD-based subharmonic mixer (SHM) at 300 GHz pumped with a photonic local oscillator. The Schottky mixer is a prototype designed and manufactured by ACST GmbH, operating at 270-320 GHz. The local oscillator is generated by photomixing on a high-frequency and high-power uni-travelling-carrier photodiode (UTC-PD), providing enough power to saturate conversion loss. Minimum single-side-band conversion loss of 14.4 dB and a peak dynamic range of 130 dB have been measured. Finally, as a proof of concept we realize an all-photonics-based 5 Gbps wireless bridge, utilizing the optically-pumped SBD mixer. With this work, we prove the feasibility of high-performance hybrid Schottky-photonic THz receivers, incorporating the best of both worlds.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.471102 | DOI Listing |
Micromachines (Basel)
January 2025
Department of Electronic Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
The growing demand for high-speed data transfer and ultralow latency in wireless networks-on-chips (WiNoC) has spurred exploration into innovative communication paradigms. Recent advancements highlight the potential of the terahertz (THz) band, a largely untapped frequency range, for enabling ultrafast tera-bit-per-second links in chip multiprocessors. However, the ultrashort duration of THz pulses, often in the femtosecond range, makes synchronization a critical challenge, as even minor timing errors can cause significant data loss.
View Article and Find Full Text PDFSci Rep
December 2024
Department of Electrical and Computer Engineering, University of Victoria, Victoria, BC, V8P 5C2, Canada.
This paper demonstrates an on-chip anhydrous D-glucose sensor using a coplanar stripline (CPS) on a thin (1 [Formula: see text]m) silicon nitride membrane at terahertz (THz) frequencies. A thin layer (≈ 10 [Formula: see text]m) of D-glucose was placed in close proximity to the CPS and the transmission response was measured using a modified THz-TDS setup. The D-glucose introduces frequency-dependent changes to the effective permittivity of the CPS resulting in a modified spectral response at the receiver.
View Article and Find Full Text PDFIn this paper, we report a three-dimensional synthetic aperture imaging method with pulsed terahertz waves realized by a terahertz time-domain spectrometer. In contrast to synthetic aperture imaging systems operating at microwave or millimeter-wave frequencies where the frequency of the transmitter is scanned in the frequency domain, in our imaging system, all the frequency components are contained in a single terahertz pulse that can be generated and detected by photoconductive antennas. The image algorithm was analyzed theoretically and confirmed numerically using the finite-difference time-domain method.
View Article and Find Full Text PDFOutdoor long-range terahertz (THz) communications often come at the expense of transmission rate. Moreover, the practicability of the single polarization optical/THz link, which is commonly used in the previous long-range THz demonstrations based on photonics, is extremely limited by the following two fatal defects. One is relying on active polarization control, and the other is not supporting the transparent bridging of optical polarization division multiplexed (PDM) signals for mature coherent optical communication networks.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!