Characterization of homogenous acid catalyzed biodiesel production from palm oil: experimental investigation and numerical simulation.

Biodiesel is a biological renewable source produced from the conversion of triglycerides to alkyl esters. Palm oil is one of the most used lipid feedstocks for biodiesel production. It becomes necessary to optimize the transesterification reaction parameters to reduce the cost and enhance the quality of biodiesel. This study focuses on the use of homogenous sulfuric acid as a catalyst for the transesterification of palm fatty acids to methyl esters in a batch-scale reactor. A novel examination of transesterification reaction input parameters using the technique for order performance by similarity to ideal solution optimization technique and the effect of these parameters on yield, viscosity, and density of palm biodiesel using 3D surface graphs is investigated in this research. The present optimization approach is implemented to find out the optimum ranking of biodiesel production. From the experimental and numerical simulation, optimum results were observed at the catalyst concentration of 6% (w/w), reaction temperature of 70 °C, the reaction time of 120 min, and alcohol to oil molar ratio of 30:1 at which yield of 95.35%, viscosity of 5.0 cSt, and density of 880 kg/m of palm biodiesel were obtained. The different physicochemical properties of produced palm methyl esters are obtained within standards set by international authorities. Selected optimized process parameters can be used for commercial-scale biodiesel production.