Simultaneous improvement in dielectric, water resistance and mechanical properties of polyimide (PI) films is critical for their practical use, but difficult to achieve. Herein, a sandwich-type porous GO/PI film with excellent comprehensive properties was obtained through integrating a GO-containing complex, fluorine-containing porous structure and sandwich-type distribution of porous structure by a simple, low-cost and green breath figure method. With the addition of only a small amount of GO-containing complex, a low dielectric constant of 2.21, water absorption of 0.51%, increment in dielectric constant after moisture treatment of 1.60% and high tensile strength of 113.1 MPa, tensile modulus of 1.70 GPa, with 35.39%, 79.42%, 81.81% of reduction and 17.22%, 21.43% of increase compared to PI film were shown, respectively. Moreover, these properties could be adjusted through regulating the component and porous structure by changing the parameters of breath figure method. These outstanding properties make the film a promising candidate for high-performance low-dielectric materials.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/asia.202201130 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Foaming ink for 3D-printing of ultralight and hyperelastic graphene architectures: Multiscale design and ultra-efficient electromagnetic interference shielding.
J Colloid Interface Sci
January 2025
School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 China; Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center, School of Advanced Manufacturing, Guangdong University of Technology, Jieyang 515200 China. Electronic address:
Extrusion-based printing of macroscopic architectures layer-by-layer offers new opportunities for constructing customized electromagnetic interference (EMI) shielding materials. However, current research primarily focuses on improving the printability of material inks by increasing contents and adding various modifiers, controllable construction of ultralight and robust macro-architectures with structural design at both macro- and micro-scales is still challenging. Herein, we develop a graphene oxide foaming ink enriched with air bubbles for direct-ink writing, enabling the creation of macroscopic graphene architectures with arbitrary geometries.
View Article and Find Full Text PDFRational design of 3D-printed scaffolds for breast tissue engineering using structural analysis.
Biofabrication
January 2025
Biomedical Engineering Department, Technion Israel Institute of Technology, Technion City, Haifa 32000, Haifa, Haifa, 3200003, ISRAEL.
Best cosmetic outcomes of breast reconstruction using tissue engineering techniques rely on the scaffold architecture and material, which are currently both to be determined. This study suggests an approach for a rational design of breast-shaped scaffold architecture, in which structural analysis is implemented to predict its stiffness and adjust it to that of the native tissue. This approach can help achieve the goal of optimal scaffold architecture for breast tissue engineering.
View Article and Find Full Text PDFCarbazole-Bismaleimide Based Hyper-Cross-Linked Porous Organic Polymer for Efficient Iodine Capture.
Langmuir
January 2025
Department of Chemical Engineering, Canakkale Onsekiz Mart University,17100 Canakkale, Turkey.
Radioactive iodine, a key waste product of nuclear energy, has been a significant concern among nuclear materials because of its high volatility and its ability to easily enter the human metabolism. Porous materials containing a large number of N-heterocyclic units such as carbazole in the skeletons use as effective adsorbents showing high iodine capture capacities. Herein, a new carbazole-bismaleimide-based hyper-cross-linked porous organic polymer (CzBMI-POP) was successfully prepared from a new tetra-armed carbazole-maleimide monomer (Bis-Cz(BMI)), which contains biscarbazole units and maleimide side groups.
View Article and Find Full Text PDFNumerical analysis of sodium diffusion in aluminum electrolysis cathode carbon blocks based on a microstructure multi-factor corrected model.
PLoS One
January 2025
The Key Laboratory of Cyber-Physical Power System of Yunnan Universities, Yunnan Minzu University, Kunming, Yunnan Province, China.
Current researches on sodium penetration in electrolytic aluminum cathode carbon blocks primarily measure cathode expansion curves, showing mostly macroscopic characteristics. However, the microscopic structure is often underexplored. As a porous medium, the diffusion performance of cathode carbon blocks is closely tied to their internal pore structure.
View Article and Find Full Text PDFEffect of Ultrasound Treatment on Structural and Physical Properties of Native Maize Starch.
Plant Foods Hum Nutr
January 2025
Instituto de Ciencia y Tecnología de Alimentos Córdoba (ICYTAC) - CONICET-UNC, Av. Juan Filloy S/N, Ciudad Universitaria, Córdoba, Argentina.
The focus of this work was to evaluate the differences between the thermal and mechanical effects generated by ultrasound waves on the properties of corn starch, which facilitate the subsequent enzymatic hydrolysis for the generation of porous starches. The results showed that both the thermal and mechanical effects have the capacity to disorganize/alter the structure of starch, impacting on its properties. Characteristics such as particle size, pasting and thermal properties (peak viscosity 1400-1800 cp.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!