Wastewater from car battery recycling plants contains lead ions. This acidic wastewater was treated by the solar steam generation method. In this research, a light porous ceramic substrate (PCS) was made based on clay, human hair, and nano-hydroxyapatite. The physical and chemical characteristics of this PCS were identified by SEM, XRD, FTIR, BET, and TGA. The high porosity in PCSs was created due to the removal of human hair in the calcination process inside the furnace. Microchannels with capillarity and hydrophilicity of nano-hydroxyapatite quickly pump water molecules to the surface of PCSs. The wastewater treatment process was carried out on two laboratory and semi-industrial scales. The temperature of the surface of the PCSs reached 70 °C in less than 60 min with the radiant heat transfer mechanism, and the water molecules were evaporated with an evaporation rate and thermal conversion efficiency were 9.22 Kgmh and 90%, respectively. The wind blew the vapor away from the system and the rate of evaporation increased. PCSs had the ability to regenerate after several consecutive cycles.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jenvman.2022.116980 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Study on the Battery Recycling Process and Risk Estimation.
Int J Environ Res Public Health
December 2024
Department of Environmental and Safety Engineering, Ajou University, Suwon 16499, Republic of Korea.
The demand for the use of secondary batteries is increasing rapidly worldwide in order to solve global warming and achieve carbon neutrality. Major minerals used to produce cathode materials, which are key raw materials for secondary batteries, are treated as conflict minerals due to their limited reserves, and accordingly, research on the battery recycling industry is urgent for the sustainable secondary battery industry. There is a significant risk of accidents because there is a lack of prior research data on the battery recycling process and various chemicals are used in the entire recycling process.
View Article and Find Full Text PDFContinuous Polarizability-Based Separation of Lithium Iron Phosphate and Graphite Using a Dielectrophoretic Particle Separator.
Langmuir
January 2025
College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071, China.
The recovery of valuable materials from spent lithium-ion batteries (LIBs) has experienced increasing demand in recent years. Current recycling technologies are typically energy-intensive and are often plagued by high operation costs, low processing efficiency, and environmental pollution concerns. In this study, an efficient and environmentally friendly dielectrophoresis (DEP)-based approach is proposed to separate the main components of "black mass" mixtures from LIBs, specifically lithium iron phosphate (LFP) and graphite, based on their polarizability differences.
View Article and Find Full Text PDFAll-solid-state Li-ion batteries (ASSBs) represent a promising leap forward in battery technology, rapidly advancing in development. Among the various solid electrolytes, argyrodite thiophosphates Li6PS5X (X = Cl, Br, I) stand out due to their high ionic conductivity, structural flexibility, and compatibility with a range of electrode materials, making them ideal candidates for efficient and scalable battery applications. However, despite significant performance advancements, the sustainability and recycling of ASSBs remain underexplored, posing a critical challenge for achieving efficient circular processes.
View Article and Find Full Text PDFElastocaloric Thermal Battery: Ultrahigh Heat-Storage Capacity Based on Generative Learning-Designed Phase-Change Alloys.
Adv Mater
January 2025
State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, 710049, China.
An elastocaloric thermal battery based on generative learning-designed phase-change alloys is developed to facilitate the efficient recycling of low-temperature waste heat. This battery stores thermal energy as latent heat in a phase-change alloy and releases it on demand through applied stress at ambient temperature. Alloy compositions and corresponding processing parameters, tailored to desired transformation characteristics, are efficiently discovered through a generative learning-enabled inverse design framework, which converts the hand-drawn target heat flow curve into tangible compositional and processing designs.
View Article and Find Full Text PDFInnovative Heating for the Nano Age: Exploring the Potentials of Carbothermal Shock.
ACS Nano
January 2025
Division of Advanced Nano-Materials, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou 215123, China.
Heating techniques have underpinned the progress of the material and manufacturing industries. However, the explosive development of nanomaterials and micro/nanodevices has raised more requirements for the heating technique, including but not limited to high efficiency, low cost, high controllability, good usability, scalability, universality, and eco-friendliness. Carbothermal shock (CTS), a heating technique derived from traditional electrical heating, meets these requirements and is advancing at a high rate.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!