Biopolymer chitosan (CS), chitosan grafted acrylamide based titanium dioxide (CS-g-PAM/TiO) and magnetite (CS-g-PAM/FeO) hybrid nanocomposites have been synthesized through free radical graft co-polymerization and successfully validated as corrosion inhibitors for mild steel in 15 % HCl solution. The synthesized compounds have been characterized through FTIR, APC, XRD and TEM. The thermal stability of the nanocomposites was established by TGA. The anticorrosive performance was determined through gravimetric measurements and by electrochemical study. According to EIS technique it was observed that CS-g-PAM/TiO and CS-g-PAM/FeO showed maximum 97.19 % and 95.49 % efficiency respectively. Langmuir adsorption isotherm is obeyed in each case. The activation and adsorption parameters have been determined from isotherm study. FESEM and AFM confirmed better adsorption layer formed by composites over mild steel surface. The elemental composition of the metal samples was proved by the XPS investigation. DFT and ANOVA test further corroborates the experimental results.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ijbiomac.2022.11.192 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Sustainable corrosion prevention of mild steel in acidic media with herb extract.
RSC Adv
January 2025
Materials and Natural Product Laboratory, Department of Chemistry, Chandigarh University Gharuan-140413 Mohali Punjab India
Mild steel provides strength to various building and industrial materials but it is badly affected by corrosion. In the present study, we investigate the efficacy of , a plant-based green corrosion inhibitor to minimize mild steel corrosion in a 1 M HSO solution. Weight loss, surface coverage, inhibition efficiency, and corrosion rate measurements were evaluated for various inhibitor concentrations and time intervals.
View Article and Find Full Text PDFCellulose nanofibers reinforced carboxylated nitrile butadiene rubber coatings for improved corrosion protection of mild steel.
Int J Biol Macromol
January 2025
School of Chemistry and Chemical Engineering, Jiangsu University, 301 Xuefu Rd., Zhenjiang, Jiangsu 212013, China. Electronic address:
The development of an efficient coating with comprehensive antimicrobial and anticorrosion properties for metals is crucial. The present study used a one-pot strategy to fabricate a high-performance nanocomposite coating of carboxylated nitrile butadiene rubber/cellulose nanofibers/zinc oxide (XNBR/CNF-ZnO), demonstrating excellent potential for application in the protection against metal corrosion. Eco-friendly CNF-ZnO nanomaterials, prepared using the in-situ generation method, were used as reinforcing fillers, while XNBR was used as the matrix material.
View Article and Find Full Text PDFExperimental and theoretical investigation of cyclohexanone derivative (CHD) as a corrosion inhibitor for mild steel in 1 M HCl.
Sci Rep
January 2025
Department of Chemistry, Sahyadri Science College, Shivamogga, Karnataka, 574146, India.
Newly synthesized 1-bromo-2-(4-bromophenylsulfonate)-4,4-dimethyl-1-cyclohexenyl-6-one (CHD) as a potential anticorrosive agent in an acidic medium at an elevated temperature range of 305-335 K. This synthesized compound confirmed by spectral characterizations and it acts as a coating on mild steel surfaces in 1 M Hydrochloric acid (HCl) solution through electrochemical reactions. The synthesis of the compound has been discussed, and the Infrared (IR) and Nucleic Magnetic Resonance (NMR) spectral analysis confirmed the derivative.
View Article and Find Full Text PDFSugar Cane ( L.) Waste Synthesized Si,N,S-Carbon Quantum Dots as High-Performance Corrosion Inhibitors for Mild Steel in Hydrochloric Acid.
ACS Omega
December 2024
Department of Inorganic Chemistry, Universidade Federal do Rio de Janeiro UFRJ, Avenida Athos da Silveira Ramos, 149, Cidade Universitária, 21941-909 Rio de Janeiro, Brazil.
This work reports the obtention of Si,N,S-CQDs from sugar cane bagasse and their inhibitory action on the mild steel corrosion in 1 mol L HCl solution. The CQDs were successfully obtained and characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, Dynamic light scattering, Raman, and UV-vis techniques, also showing endogenous self-doping. The anti-corrosive activity of CQDs was investigated by gravimetric tests, potentiodynamic polarization curves, electrochemical impedance measurements, atomic force microscopy, and scanning electron microscopy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!