Natural rubber is the only biosynthesized rubber and the most prominent of all the elastomers. Insertion of nanofillers into natural rubber matrix has received much research interest because of the enhanced mechanical, thermal, electrical, antibacterial, etc. properties of the final natural rubber nanocomposite. Molybdenum disulfide (MoS), an important member in transition metal dichalcogenides (TMD) is having excellent optical, thermal, mechanical, electronic and antibacterial properties. The inherent properties of this novel filler was exploited through the preparation of natural rubber-MoS nanocomposites via latex dipping method in which tannic acid (TA), naturally occurring macromolecule was used as an exfoliating agent for MoS. MoS:TA dispersions were prepared in 1:2, 1:4 and 1:6 ratios by mechanical stirring followed by sonication method for analyzing the optimum amount of exfoliating agent for the preparation of NR-MoS nanocomposite. MoS:TA in 1:4 ratio was found to be the optimum loading for the NR nanocomposite preparation with improved mechanical, thermal and antibacterial properties. The enhanced properties of the NR composites could be attributed to the synergistic effect of both MoS and TA. The current study shows the role of TA in tuning the properties of NR/MoS nanocomposites that enable their potential utilization in various biomedical applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ijbiomac.2022.11.054 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
First-principles calculations to investigate thermoelectric, thermophysical, and optical properties of RNi₄P₁₂ (R = Sm, Eu) rare-earth metal skutterudites.
Sci Rep
December 2024
Condensed Matter Theory Group, School of Studies in Physics, Jiwaji University, Gwalior, 474 011, India.
This study presents a comprehensive investigation into the intrinsic properties of RNiP (where R = Sm, Eu) filled skutterudite, employing the full-potential linearized augmented plane wave method within density functional theory (DFT) simulations using the WIEN2k framework. Structural, phonon stability, mechanical, electronic, magnetic, transport, thermal, and optical properties are thoroughly explored to provide a holistic understanding of these materials. Initially, the structural stability of SmNiP and EuNiP is rigorously evaluated through ground-state energy calculations obtained from structural optimizations, revealing a preference for a stable ferromagnetic phase over competing antiferromagnetic and non-magnetic phases.
View Article and Find Full Text PDFUltralow k covalent organic frameworks enabling high fidelity signal transmission and high temperature electromechanical sensing.
Nat Commun
December 2024
Key Laboratory of Advanced Polymeric Materials of Shanghai, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, P. R. China.
As integrated circuits have developed towards the direction of complexity and miniaturization, there is an urgent need for low dielectric constant materials to effectively realize high-fidelity signal transmission. However, there remains a challenge to achieve ultralow dielectric constant and ultralow dielectric loss over a wide temperature range, not to mention having excellent thermal conductivity and processability concurrently. We herein prepare dual-linker freestanding covalent organic framework films with tailorable fluorine content via interfacial polymerization.
View Article and Find Full Text PDFMetamaterial-based injection molding for the cost-effective production of whole cuts.
Nat Commun
December 2024
Alexander Grass Center for Bioengineering, The Hebrew University of Jerusalem, Jerusalem, Israel.
The escalating global demand for meat products has intensified ecological concerns, underscoring the need for sustainable meat alternatives. Although current methods effectively imitate ground meat, mimicking whole cuts, which constitute 54% of the global market, remains challenging due to the lack of scalable technology. Injection molding is a massively scalable manufacturing technology developed for the polymer industry.
View Article and Find Full Text PDFHigh-performance 2D electronic devices enabled by strong and tough two-dimensional polymer with ultra-low dielectric constant.
Nat Commun
December 2024
Department of Materials Science and NanoEngineering and the Rice Advanced Materials Institute, Rice University, Houston, TX, 77005, USA.
As the feature size of microelectronic circuits is scaling down to nanometer order, the increasing interconnect crosstalk, resistance-capacitance (RC) delay and power consumption can limit the chip performance and reliability. To address these challenges, new low-k dielectric (k < 2) materials need to be developed to replace current silicon dioxide (k = 3.9) or SiCOH, etc.
View Article and Find Full Text PDFMultifunctional 2D FETs exploiting incipient ferroelectricity in freestanding SrTiO nanomembranes at sub-ambient temperatures.
Nat Commun
December 2024
Engineering Science and Mechanics, Penn State University, University Park, PA, USA.
Incipient ferroelectricity bridges traditional dielectrics and true ferroelectrics, enabling advanced electronic and memory devices. Firstly, we report incipient ferroelectricity in freestanding SrTiO nanomembranes integrated with monolayer MoS to create multifunctional devices, demonstrating stable ferroelectric order at low temperatures for cryogenic memory devices. Our observation includes ultra-fast polarization switching (~10 ns), low switching voltage (<6 V), over 10 years of nonvolatile retention, 100,000 endurance cycles, and 32 conductance states (5-bit memory) in SrTiO-gated MoS transistors at 15 K and up to 100 K.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!