The chitosan-biochar composite is a clean and environmentally friendly immobilized microorganisms carrier. In this study, the chitosan-biochar composite as a carrier to immobilize a compound microbial agent contained Pseudomonas aeruginosa and Bacillus licheniformis, and investigated its role in the remediation of oil-contaminated soil. When using 1% (v/v) acetic acid, 3% (m/v) chitosan solution, 0.1% biochar, 4% (v/v) NaOH solution, freeze-drying 6 h, the optimal chitosan-biochar composite material could be obtained. The specific surfacearea of the material increased to 1.725 m/g and the average pore size also increased from 130.2260 nm to 165.2980 nm after the addition of biochar through the analysis of specific surface area and pore size, which enlarged the contact area of microorganisms and crude oil with the material. SEM showed that the bacterial successfully adhered to the surface and internal of the material. Using FTIR, the results showed that the synthesis of composite carrier material was the covalent combination of -NH on chitosan and -COOH on biochar, forming a new chemical bond -NH-CO-. After 60 days of remediation of oil-contaminated soil, the removal rate of crude oil by chitosan-biochar composite immobilized microorganism method was 45.82%, which was 21.26% higher than that of natural remediation. Simultaneously, several oil-degrading bacteria increased at genus level, including Nocardioides (26.79%-33.09%), Bacillus (3.01%-4.10%), Dietzia (1.84%-5.56%), Pseudomonas (0-0.78%), among which Pseudomonas belongs to exogenous bacteria. The results indicated that the chitosan-biochar composite material has high application value in removing crude oil, and further provides a new strategy for bioremediation of oil-contaminated soil.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2022.137367DOI Listing

Publication Analysis

Top Keywords

chitosan-biochar composite
20
crude oil
16
oil-contaminated soil
12
immobilized microorganism
8
composite carrier
8
remediation oil-contaminated
8
composite material
8
pore size
8
composite
6
material
6

Similar Publications

Sustainable Zn removal using highly efficient, novel, and cost-effective chitosan-magnetic biochar composite.

Environ Sci Pollut Res Int

May 2024

Department of Chemical Engineering, Birla Institute of Technology & Science, Pilani Hyderabad Campus, Hyderabad, 500078, India.

This study focused on the development of a sustainable and low-cost adsorbent derived from the chitosan-biochar composite for the removal of Zn from an aqueous solution. Biochar was prepared from cotton stalk residue by pyrolysis at 600 °C for 2 h, modified with FeCl and composed with chitosan in various ratios (1:3, 1:1, 3:1), leading to the formation of an efficient, thermally stable, and rich with functional groups chitosan-biochar composite denoted as CHB-Fe-CS. Functional groups (hydroxyl, carboxyl, and amine) were identified as key contributors to the adsorption mechanism.

View Article and Find Full Text PDF

New chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole antibiotics in water.

Bioresour Technol

October 2023

Faculty of Environmental Sciences, University of Science, Vietnam National University, Hanoi, 334 Nguyen Trai Road, Thanh Xuan District, Hanoi, Viet Nam.

This study aims to develop a new chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole (SMX) antibiotics in water. Biochar was prepared from orange peel (OB) and spent coffee grounds (SCB). To fabricate chitosan-biochar composites, chitosan and biochar were crosslinked with glutaraldehyde.

View Article and Find Full Text PDF

The chitosan-biochar composite is a clean and environmentally friendly immobilized microorganisms carrier. In this study, the chitosan-biochar composite as a carrier to immobilize a compound microbial agent contained Pseudomonas aeruginosa and Bacillus licheniformis, and investigated its role in the remediation of oil-contaminated soil. When using 1% (v/v) acetic acid, 3% (m/v) chitosan solution, 0.

View Article and Find Full Text PDF

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties.

View Article and Find Full Text PDF

Fe(III) loaded chitosan-biochar composite fibers for the removal of phosphate from water.

J Hazard Mater

August 2021

Korea Biochar Research Center, APRU Sustainable Waste Management Program & Division of Environmental Science and Ecological Engineering, Korea University, Seoul 02841, Republic of Korea. Electronic address:

Excess phosphorous (P) in aquatic systems causes adverse environmental impacts including eutrophication. This study fabricated Fe(III) loaded chitosan-biochar composite fibers (FBC-N and FBC-C) from paper mill sludge biochar produced under N (BC-N) and CO (BC-C) conditions at 600 °C for adsorptive removal of phosphate from water. Investigations using SEM/EDX, XPS, Raman spectroscopy, and specific surface area measurement revealed the morphological and physico-chemical characteristics of the adsorbent.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!