Supercapacitor and high properties of CNT-PbS reinforced quinoxaline amine based polybenzoxazine composites.

The new 2,3-diphenylquinoxalin-6-amine (dpqa) was designed and synthesized through an efficient and high yield condensation process. Data from FTIR and H-NMR spectroscopy have been adopted to ascertain the molecular structure of benzoxazine compounds. Furthermore, the quinoxaline amine based benzoxazine (BA-dpqa) was synthesized using bisphenol-A and paraformaldehyde followed by combining different weight percentages (1, 5 and 10 wt%) of (3-glycidyloxypropyl)trimethoxysilane functionalized CNT-PbS with benzoxazine to obtain nanocomposites. The thermal and morphological properties of the quinoxaline amine based neat polybenzoxazine matrix poly(BA-dpqa) and CNT-PbS/poly(BA-dpqa) composites were analysed by XRD, TGA and SEM analysis. The values of the degradation temperature () obtained for neat poly(BA-dpqa) and 10 wt% CNT-PbS/poly(BA-dpqa) composites are 414 °C and 424 °C. Furthermore, the chair yield percentage was calculated as 33% and 35% respectively. The water contact angle of polybenzoxazine gradually increased from 89° to 127° proportional to the content of CNT-PbS. Among the composites, 10 wt% CNT-PbS reinforced poly(BA-dpqa) nanocomposites possess higher dielectric constant ( = 11.0) than other composites. The pseudocapacitor nature of the prepared electrodes is demonstrated by the good electrochemical performance according to the CV curve. Also, the prepared 10 wt% CNT-PbS/poly(BA-dpqa) (637 F g at 5 A g and 11.8 Ω) electrode shows better capacitance and lower charge transfer resistance values than 5 wt% CNT-PbS/poly(BA-dpqa) (613 F g at 5 A g and 13.2 Ω) and neat poly(BA-dpqa) (105 F g at 5 A g and 15.6 Ω) according to the charge/discharge curves and EIS spectra. 10 wt% CNT-PbS/poly(BA-dpqa) shows 99.2% cycling efficiency even at the 2000th cycle, which indicates the good electrochemical performance of the prepared electrode.