In this study, the performance of the montmorillonite-filled sodium alginate/gelatin (SA-GEL-MMT) ternary biocomposite microbeads on the adsorptive removal of crystal violet (CV) dye was investigated. Firstly, the composites containing different weight ratios of MMT such as 10 %, 15 %, and 20 % were prepared. The composite beads were cross-linked using a calcium chloride (3%wt/v) solution. To determine the optimum sorption conditions the studies were performed at different parameters namely temperature, pH, contact time, sorbent dose, and dye concentration. From the sorption studies, the maximum capacity of the microbeads was found as 1000.0 mg/g whereas the maximum removal of the dye was 92.1 % at pH = 7 and a temperature of 25 °C. Additionally, the kinetic studies showed that the sorption of the dye followed the pseudo-second-order kinetics. Moreover, the adsorptive removal of the dye occurs spontaneously. This study suggests that the use of SA-GEL-MMT can be highly effective and reusable for the treatment of wastewater.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ijbiomac.2022.11.002 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Novel probiotics adsorbing and excreting microplastics show potential gut health benefits.
Front Microbiol
January 2025
Bluepha Co., Ltd., Shanghai, China.
Microplastics (MP) contamination in food and water poses significant health risks. While microbes that form biofilm show potential for removing MP from the environment, no methods currently exist to eliminate these non-degradable MP from the human body. In this study, we propose using probiotics to adsorb and remove ingested MP within the gut.
View Article and Find Full Text PDFNanosized MCM-41 silica from rice husk and its application for the removal of organic dyes from water.
RSC Adv
January 2025
Dipartimento di Scienze e Innovazione Tecnologica, Università Del Piemonte Orientale A. Avogadro Viale T. Michel 11 15121 Alessandria Italy
A novel synthesis of a nanometric MCM-41 from biogenic silica obtained from rice husk is here presented. CTABr and Pluronic F127 surfactants were employed as templating agents to promote the formation of a long-range ordered 2D-hexagonal structure with cylindrical pores and to limit the particle growth at the nanoscale level thus resulting in a material with uniform particle size of 20-30 nm. The physico-chemical properties of this sample (RH-nanoMCM) were investigated through a multi-technique approach, including PXRD, Si MAS NMR, TEM, -potential and N physisorption analysis at 77 K.
View Article and Find Full Text PDFThis work aimed at addressing the problem of hexavalent chromium pollution in the water environment, designing and preparing the Cu/CuO/NH-MIL-88B (Fe) heterojunction material with NH-MIL-88B (Fe) as the carrier, Cu/CuO was loaded on NH-MIL-88B (Fe) by light-assisted reduction. The loading of CuO effectively improves the visible light absorption capacity of the composite material. The SPR effect of Cu improves the separation and transfer of photogenerated carriers in the composite material.
View Article and Find Full Text PDFEfficient Phytoremediation of Methyl Red and Methylene Blue Dyes from Aqueous Solutions by .
ACS Omega
January 2025
Department of Chemistry, University at Albany - State University of New York (SUNY), 1400 Washington Avenue, Albany, New York 12222, United States.
The contamination of water with dyes stemming from the discharge of industrial waste poses significant environmental risks and health concerns. In this study, the phytoremediation potential of the wetland plant was investigated (as a function of plant biomass, pH, contact time, and initial dye concentration) for the removal of methylene blue and methyl red dyes from wastewater. The experimental adsorption capacities under the optimum conditions were found to be 1.
View Article and Find Full Text PDFSynthesis of UiO-66-NH@PSF Hollow Fiber Membrane with Enhanced Simultaneous Adsorption of Pb and Phosphate for Hydrogen Peroxide Purification.
ACS Appl Mater Interfaces
January 2025
Department of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Fuzhou University, Fuzhou 350116, China.
Electronic grade hydrogen peroxide plays a crucial role in the fabrication of large-scale integrated circuits. However, hydrogen peroxide prepared by the anthraquinone method contains impurities such as lead ions (Pb) and phosphate, which can seriously affect the yield of the circuit. Traditional adsorbent materials have difficulty in solving the problem of simultaneous adsorption of trace anions and cations in hydrogen peroxide due to the single adsorption site and poor adsorption kinetics.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!