Benzene, toluene and xylene (BTX) are volatile organic compounds released into the environment, that require urgent removal to avoid adverse health effects. In this work, the modelling and optimization of the preparation factors for magnetite coated oleic acid (MNP-OA) composite from microwave synthesis using response surface methodology were conducted to maximize BTX removal, and iron content. The influence of five crucial preparation variables: the FeFe solution volumes, microwave power, volume of ammonia water (VAW), reaction time and volume of oleic acid (VOA) on the iron content (% Fe), and BTX adsorption capacity were investigated. The analysis of variance results revealed that VOA and VAW were the most influential factors for high % Fe content, and improved BTX removal. The % Fe, and BTX adsorption capacity for MNP-OA composite at optimized experimental conditions were estimated to be 85.57%, 90.02 mg/g (benzene), 90.07 mg/g (toluene), and 96.31 mg/g (xylene).

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9633638PMC
http://dx.doi.org/10.1038/s41598-022-22716-wDOI Listing

Publication Analysis

Top Keywords

btx removal
12
oleic acid
12
magnetite coated
8
coated oleic
8
synthesis response
8
response surface
8
surface methodology
8
mnp-oa composite
8
iron content
8
btx adsorption
8

Similar Publications

Modeling and simulation for the sustainable recovery of aromatics (BTX) from petrochemical industrial wastewater.

Environ Sci Pollut Res Int

September 2024

Department of Chemical Engineering, BITS Pilani, Dubai Campus, Dubai International Academic City, Dubai, United Arab Emirates.

Article Synopsis
  • Petrochemical wastewater contains harmful organic and inorganic pollutants, posing risks to soil, water, and human health.
  • This study aims to recover valuable aromatics (like benzene and toluene) and water from this wastewater while removing toxic heavy metals through a specific treatment process using sodium bicarbonate.
  • The effectiveness of the process was confirmed through Aspen Hysys simulation and lab experiments, achieving over 99.5% removal of heavy metals, highlighting the potential for recycling and sustainability in petrochemical industries.
View Article and Find Full Text PDF

Effect of Fe-activated persulfate combined with biodegradation in removing gasoline BTX from karst groundwater: A box-column experimental study.

Environ Sci Pollut Res Int

August 2024

Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area, Guilin University of Technology, Guilin, 541004, China.

In-situ chemical oxidation with persulfate (PS-ISCO) is a preferred approach for the remediation of fuel-contaminated groundwater. Persulfate (PS) can be activated by various methods to produce stronger sulfate radicals for more efficient ISCO. Despite karst aquifers being widespread, there are few reports on PS-ISCO combined with Fe-activated PS.

View Article and Find Full Text PDF

BTXs removals by modified clay during mitigation of Karenia brevis bloom: Insights from adsorption and transformation.

Chemosphere

August 2024

CAS Key Laboratory of Marine Ecology and Environmental Sciences, Institute of Oceanology, Chinese Academy of Sciences, Qingdao, 266071, China; University of Chinese Academy of Sciences, Beijing, 100049, China; Laboratory for Marine Ecology and Environmental Science, Qingdao Marine Science and Technology Center, Qingdao, 266200, China. Electronic address:

Harmful algal blooms (HABs), especially those caused by toxic dinoflagellates, are spreading in marine ecosystems worldwide. Notably, the prevalence of Karenia brevis blooms and potent brevetoxins (BTXs) pose a serious risk to public health and marine ecosystems. Therefore, developing an environmentally friendly method to effectively control HABs and associated BTXs has been the focus of increasing attention.

View Article and Find Full Text PDF

Botulinum toxin-A (BTX-A), a neurotoxin produced by Clostridium botulinum, was assessed for relieving implant-related pectoralis major muscle's painful spasms. In detail, 100 units of BTX-A can reduce muscle activity and, as a consequence, muscle spasms. The latter is considered the leading cause of post-operative pain after the sub-pectoral tissue expansion, sometimes leading to early expanders' removal.

View Article and Find Full Text PDF

Modified clay compounds are used globally as a method of controlling harmful algal blooms, and their use is currently under consideration to control Karenia brevis blooms in Florida, USA. In 1400 L mesocosm tanks, chemical dynamics and lethal and sublethal impacts of MC II, a polyaluminum chloride (PAC)-modified kaolinite clay, were evaluated over 72 h on a benthic community representative of Sarasota Bay, which included blue crab (Callinectes sapidus), sea urchin (Lytechinus variegatus), and hard clam (Mercenaria campechiensis). In this experiment, MC II was dosed at 0.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!