Enhancement of antifouling properties, metal ions and protein separation of poly(ether-ether-sulfone) ultrafiltration membranes by incorporation of poly ethylene glycol and n-ZnO.

Composite polymeric membranes with enhanced anti-fouling properties, antimicrobial activities and flux were produced via the phase inversion technique using poly (ether-ether-sulfone) (PEES)/polyethylene glycol (PEG) and n-ZnO. SEM and ATR-FTIR spectroscopy were used to study the morphological and chemical properties of the resulting ultrafiltration membranes. PEG and n-ZnO concentration has an effect on membrane morphologies, ultrafiltration performance, thermal characteristics, metal ion separation studies, surface hydrophilicity and anti-fouling capabilities. The permeate flux increased when the PEG concentration was raised. This results revealed that adding PEG and n-ZnO to membranes increased their surface hydrophilicity and anti-fouling properties. The inclusion of 1.5 wt % n-ZnO and 5 wt % PEG to the pristine PEES membrane resulted in a higher flux of 233.76 L m h, 70.09 % of water content, 47.46° of contact angle, the porosity of 30.20 %, and hydraulic resistance of 0.22 kPa/Lmh. Anti-fouling properties of the fabricated membrane were assessed using a model foulant BSA, which revealed a high flux recovery ratio value. As a result, the PEG and n-ZnO incorporated membrane is more hydrophilic than the virgin membrane. In addition, the prepared PEES/PEG/n-ZnO membrane showed a significant increase in metal ions and protein rejection. Furthermore, an antibacterial test of the membrane revealed that the PEG and n-ZnO composite membrane outperformed the bare PEES membrane in terms of antibacterial capabilities. Overall, the findings reveal that combining n-ZnO and PEG resulted in a membrane with improved anti-fouling capabilities and hydrophilicity, making it suitable for water purification.