In situ calibration of passive sampling methods for urban micropollutants using targeted multiresidue GC and LC screening systems.

Chemosphere

Monitoring, Design and Reporting, Sydney Water, 1 Smith Street, Parramatta, NSW, 2150, Australia. Electronic address:

Published: January 2023

In this study, Chemcatcher (CC) and Polar Organic Chemical Integrative Samplers (POCIS) passive samplers were chosen to investigate trace organic chemical residues in urban streams of the megacity of Sydney, Australia. In situ calibration with these passive samplers investigated 1392 organic chemicals. Six sets of CC passive samplers fitted with SDB-XC or SDB-RPS disks and six POCIS containing Oasis HLB sorbent were deployed at three sites. Every week for six weeks across three deployments, composite water samples were retrieved from autosamplers, along with one set of CC/POCIS passive samplers. Samples were analysed by Automated Identification and Quantification System (AIQS) GC/MS or LC/QTOF-MS database methods with 254 chemicals detected. The most frequently detected compounds under GC/MS analysis were aliphatic, pesticides, phenols, PAHs, sterols and fatty acid methyl esters while from LC/QTOF-MS analysis these were pesticides, pharmaceuticals, and personal care products. Sampling rates (R) ranged between <0.001 - 0.132 L day (CC SDB-XC, 18 chemicals), <0.001 - 0.291 L day (CC SDB-RPS, 28 chemicals), and <0.001 - 0.576 L day (POCIS Oasis HLB, 30 chemicals). Assessment of deployment duration indicated that about half of the chemicals that were continuously detected across all deployment weeks had maximal simple linear regression R values at four weeks for CC SDB-RPS (seven of 13 chemicals) and at three weeks for POCIS Oasis HLB (seven of 14 chemicals). Where ranges of R recorded from the estuarine site were able to be compared to ranges of R from one or both freshwater sites, only tributyl phosphate had a higher range of R out of 21 possible chemical comparisons, and suggested salinity was an unlikely influence on R. Whereas relatively higher rainfall of the third round of deployment aligned with higher R across the estuarine and freshwater sites for CC SDB-RPS and POCIS for nearly all possible comparisons.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2022.136997DOI Listing

Publication Analysis

Top Keywords

passive samplers
16
situ calibration
8
calibration passive
8
organic chemical
8
passive
5
samplers
5
passive sampling
4
sampling methods
4
methods urban
4
urban micropollutants
4

Similar Publications

The source-receptor relationship of atmospheric mercury is a critical environmental concern. However, comprehensive evaluations of mercury pollution based on spatially resolved and time-averaged data have not yet been conducted in Korea. In this study, the spatio-temporal variations of total gaseous mercury (TGM) and mercury isotopes were examined using passive air samplers at 30 sites in Ulsan over one year.

View Article and Find Full Text PDF

Global declines in wild mussel populations and production have been linked to the impacts of climate change and pollution. Summer die-offs of mussels (Perna canaliculus), spat retention issues, and a severe decline in mussel spat settlement have been reported in the Marlborough Sounds, an important area for mussel farming in New Zealand. Preliminary evidence suggests that naturally occurring contaminants and changing land use in the surrounding areas, could contribute to the decline of this species.

View Article and Find Full Text PDF

A POCIS-based approach for the monitoring of pharmaceuticals in wastewater treatment plants: Calibration and deployment challenges.

Environ Pollut

January 2025

Department of Analytical and Applied Chemistry, School of Engineering, IQS-Universitat Ramon Llull, Via Augusta 390, 08017, Barcelona, Spain. Electronic address:

Article Synopsis
  • The study investigates the use of Polar Organic Chemical Integrative Samplers (POCIS) as a more effective method for monitoring pharmaceutical residues in wastewater compared to traditional grab sampling.
  • POCIS allows for continuous sampling over days or weeks, providing more representative data, though challenges remain in obtaining precise quantitative results due to calibration needs.
  • The research successfully identifies and calibrates sampling rates for 49 pharmaceuticals in a wastewater treatment plant near Barcelona, yielding high concentrations of specific compounds, thus establishing a methodology for better environmental monitoring of pharmaceuticals.
View Article and Find Full Text PDF

An Azide-based Passive Sampler for Monitoring Abiotic Reduction of Chlorinated Solvent Contaminants in Groundwater.

Chemosphere

January 2025

Department of Civil and Environmental Engineering, University of Massachusetts Lowell, Massachusetts, United States. Electronic address:

There is significant interest in monitoring abiotic decomposition of chlorinated solvents at contaminated sites due to large uncertainties regarding the rates of abiotic attenuation of trichloroethylene (PCE) and perchloroethylene (PCE) under field conditions. In this study, an innovative passive sampling tool was developed to quantify acetylene, a characteristic product of abiotic reduction of TCE or PCE, in groundwater. The sampling mechanism is based on the highly specific and facile click reaction between acetylene and an azide compound to form a biologically and chemically stable triazole product.

View Article and Find Full Text PDF

Despite the significant benefits of aquatic passive sampling (low detection limits and time-weighted average concentrations), the use of passive samplers is impeded by uncertainties, particularly concerning the accuracy of sampling rates. This study employed a systematic evaluation approach based on the combination of meta-analysis and quantitative structure-property relationships (QSPR) models to address these issues. A comprehensive meta-analysis based on extensive data from 298 studies on the Polar Organic Chemical Integrative Sampler (POCIS) identified essential configuration parameters, including the receiving phase (type, mass) and the diffusion-limiting membrane (type, thickness, pore size), as key factors influencing uptake kinetic parameters.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!