Lithium-oxygen batteries have received extensive attention due to their high theoretical specific capacity, but problems such as high charging overpotential and poor cycling performance hinder their practical application. Herein, a pulsed current, which merits its relaxation phenomenon, is applied during the charging cycle to address the abovementioned problems. Pulsed charging can not only reduce the charging overpotential, but also control the mass transfer and distribution of lithium ions. As a result, the uniform deposition of lithium ions on the anode surface is realized, the repeated rupture and formation of the solid electrolyte interphase is reduced, and the growth of the lithium dendrites is successfully suppressed, thereby achieving the purpose of protecting lithium metal from excessive consumption. When the pulsed charging duty ratio (/) is 1:1, after 25 cycles, the lithium-oxygen battery anode still presents a relatively flat and dense deposition surface, which is obviously better than the loose and rough surface after normal cycling. In addition, the protective effect of pulsed charging on the lithium metal anodes of lithium-oxygen batteries is also verified by the construction of other lithium-based batteries.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.2c15347 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Dual-Anion-Rich Polymer Electrolytes for High-Voltage Solid-State Lithium Metal Batteries.
ACS Nano
January 2025
Department of Physics, JC STEM Lab of Energy and Materials Physics, City University of Hong Kong, Hong Kong 999077, P. R. China.
Solid polymer electrolytes (SPEs) are promising candidates for lithium metal batteries (LMBs) owing to their safety features and compatibility with lithium metal anodes. However, the inferior ionic conductivity and electrochemical stability of SPEs hinder their application in high-voltage solid-state LMBs (HVSSLMBs). Here, a strategy is proposed to develop a dual-anion-rich solvation structure by implementing ferroelectric barium titanate (BTO) nanoparticles (NPs) and dual lithium salts into poly(vinylidene fluoride) (PVDF)-based SPEs for HVSSLMBs.
View Article and Find Full Text PDFSpray-Flame Synthesis (SFS) and Characterization of LiAlYTi(PO) [LA(Y)TP] Solid Electrolytes.
Nanomaterials (Basel)
December 2024
Institute for Energy and Materials Processes-Reactive Fluids, University of Duisburg-Essen, 47057 Duisburg, Germany.
Solid-state electrolytes for lithium-ion batteries, which enable a significant increase in storage capacity, are at the forefront of alternative energy storage systems due to their attractive properties such as wide electrochemical stability window, relatively superior contact stability against Li metal, inherently dendrite inhibition, and a wide range of temperature functionality. NASICON-type solid electrolytes are an exciting candidate within ceramic electrolytes due to their high ionic conductivity and low moisture sensitivity, making them a prime candidate for pure oxidic and hybrid ceramic-in-polymer composite electrolytes. Here, we report on producing pure and Y-doped Lithium Aluminum Titanium Phosphate (LATP) nanoparticles by spray-flame synthesis.
View Article and Find Full Text PDFPatterning Planar, Flexible Li-S Battery Full Cells on Laser-Induced Graphene Traces.
Nanomaterials (Basel)
December 2024
Quantum Nano Centre, Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
Laser conversion of commercial polymers to laser-induced graphene (LIG) using inexpensive and accessible CO lasers has enabled the rapid prototyping of promising electronic and electrochemical devices. Frequently used to pattern interdigitated supercapacitors, few approaches have been developed to pattern batteries-in particular, full cells. Herein, we report an LIG-based approach to a planar, interdigitated Li-S battery.
View Article and Find Full Text PDFTransition metal phosphide-based oxygen electrocatalysts for aqueous zinc-air batteries.
Chem Commun (Camb)
January 2025
Functional Materials and Electrochemistry Lab, Department of Chemistry, Indian Institute of Technology Kharagpur, Kharagpur, 721302, West Bengal, India.
Electrically rechargeable zinc-air batteries (ZABs) are emerging as promising energy storage devices in the post-lithium era, leveraging the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) at the air cathodes. Efficient bifunctional oxygen electrocatalysts, capable of catalyzing both the ORR and OER, are essential for the operation of rechargeable ZABs. Traditional Pt- and RuO/IrO-based catalysts are not ideal, as they lack sufficient bifunctional ORR and OER activity, exhibit limited long-term durability, require high overpotentials and are expensive.
View Article and Find Full Text PDFThe Role of Long-Range Interactions Between High-Entropy Single-Atoms in Catalyzing Sulfur Conversion Reactions.
Adv Mater
January 2025
School of Materials Science and Engineering, University of Science and Technology of China, Shenyang, 110016, China.
Sulfur conversion reactions are the foundation of lithium-sulfur batteries but usually possess sluggish kinetics during practical battery operation. Herein, a high-entropy single-atom catalyst (HESAC) is synthesized for this process. In contrast to conventional dual-atom catalysts that form metal-metal bonds, the center metal atoms in HESAC are not bonded but exhibit long-range interactions at a sub-nanometer distance (<9 Å).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!