Self-Defensive Antimicrobial Surfaces Using Polymyxin-Loaded Poly(styrene sulfonate) Microgels.

ACS Biomater Sci Eng

Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, New Jersey07030, United States.

Published: November 2022

Self-defensive antimicrobial surfaces are of interest because they can inhibit bacterial colonization while minimizing unnecessary antimicrobial release in the absence of a bacterial challenge. One self-defensive approach uses self-assembly to first deposit a submonolayer coating of polyelectrolyte microgels and subsequently load those microgels by complexation with small-molecule antimicrobials. The microgel/antimicrobial complexation strength is a key parameter that controls the ability of the antimicrobial both to remain sequestered within the microgels when exposed to medium and to release in response to a bacterial challenge. Here we study the relative complexation strengths of two FDA-approved cationic antibiotics─colistin (polymyxin E) and polymyxin B─with microgels of poly(styrene sulfonate) (PSS). These polymyxins are similar cyclic polypeptides with +5 charge at pH 7.4. However, polymyxin B substitutes an aromatic ring for a dimethyl moiety in colistin, and this aromaticity can influence complexation via π and hydrophobic interactions. Coarse-grained molecular dynamics shows that the free-energy change associated with polymyxin B/PSS complexation is more negative than that of colistin/PSS complexation. Experimentally, optical microscopy of microgel deswelling shows that both antibiotics load quickly from low-ionic-strength phosphate buffer. The enhanced polymyxin B/PSS complexation strength is then manifested by subsequent exposure to flowing antibiotic-free buffer with varying NaCl concentration. Microgels loaded with polymyxin B remain stably deswollen to higher salt concentrations than do colistin/PSS microgels. Importantly, exposing loaded microgels to in nutrient-free-flowing phosphate buffer shows that bacteria are killed by physical contact with the loaded microgels consistent with the contact-transfer mechanism of self-defensiveness. culture experiments show that these same surfaces, nevertheless, support the adhesion, spreading and proliferation of human fetal osteoblasts. These findings suggest a pathway to create a self-defensive antimicrobial surface effective under physiological conditions based on the nonmetabolic bacteria-triggered release of FDA-approved antibiotics.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsbiomaterials.2c00783DOI Listing

Publication Analysis

Top Keywords

self-defensive antimicrobial
12
microgels
9
antimicrobial surfaces
8
polystyrene sulfonate
8
bacterial challenge
8
complexation strength
8
polymyxin b/pss
8
b/pss complexation
8
phosphate buffer
8
loaded microgels
8

Similar Publications

Smart self-defensive coatings with bacteria-triggered antimicrobial response for medical devices.

Biomater Sci

October 2024

Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Torino 10129, Italy.

Article Synopsis
  • * The review discusses innovative biomaterials designed with smart coatings that respond to bacterial presence, allowing for on-demand antibacterial action and reducing the reliance on traditional antibiotics.
  • * It emphasizes the importance of developing these self-defensive coatings to minimize antibiotic resistance, protect the natural microbiome, and ultimately lower healthcare expenses while exploring future improvements in this field.
View Article and Find Full Text PDF

pH-Responsive antibacterial metal-phenolic network coating on hernia meshes.

Biomater Sci

May 2024

Frontiers Science Center for Flexible Electronics (FSCFE), Xi'an Institute of Flexible Electronics (IFE), Xi'an Institute of Biomedical Materials and Engineering (IBME), Ningbo Institute, Northwestern Polytechnical University (NPU), Xi'an, 710072, China.

Polypropylene (PP) mesh is widely used in hernioplasty, but it is prone to contamination by pathogenic bacteria. Here, we present an infection microenvironment-responsive metal-phenolic network (MPN) coating, which is made up of Cu and tannic acid (TA) (referred to as CT coating), and is fabricated on PP meshes by layer-by-layer (LbL) assembly. The CT coating provided a robust protection for the PP mesh from pathogenic bacterial infection in a pH-responsive manner due to the pH-responsive disassembly kinetics of MPN complexes.

View Article and Find Full Text PDF

Supramolecular Peptoid Structure Strengthens Complexation with Polyacrylic Acid Microgels.

Biomacromolecules

February 2024

Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, New Jersey 07030, United States.

We have studied the complexation between cationic antimicrobials and polyanionic microgels to create self-defensive surfaces that responsively resist bacterial colonization. An essential property is the stable sequestration of the loaded (complexed) antimicrobial within the microgel under a physiological ionic strength. Here, we assess the complexation strength between poly(acrylic acid) [PAA] microgels and a series of cationic peptoids that display supramolecular structures ranging from an oligomeric monomer to a tetramer.

View Article and Find Full Text PDF

Self-controllable proteinic antibacterial coating with bacteria-triggered antibiotic release for prevention of periprosthetic infection.

Biomaterials

March 2024

Department of Chemical Engineering, Pohang University of Science and Technology, Pohang 37673, Republic of Korea; Medical Science and Engineering, School of Convergence Science and Technology, Pohang University of Science and Technology, Pohang 37673, Republic of Korea. Electronic address:

Periprosthetic infection is a devastating postimplantation complication in which a biofilm layer harboring invasive microorganisms forms around orthopedic implants, leading to severe implant failure and patient morbidity. Despite the development of several infection-triggered antibiotic release approaches, most current antibacterial coatings are susceptible to undesired antibiotic leakage or mechanical disintegration during prosthesis installation. Herein, we propose a self-controllable proteinic antibacterial coating capable of both long-lasting adherence onto titanium implant substrates over the implant fixation period and instantaneous bacterial eradication.

View Article and Find Full Text PDF

Self-Defensive Antimicrobial Shape Memory Polyurethanes with Honey-Based Compounds.

ACS Appl Mater Interfaces

December 2023

Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States.

Infection treatment plays a crucial role in aiding the body in wound healing. To that end, we developed a library of antimicrobial polymers based on segmented shape memory polyurethanes with nondrug-based antimicrobials (i.e.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!