Surface treatment technology is an effective method to reinforce the durability of concrete. In this study, cement-based materials containing industrial solid wastes were modified by hybrid nano-silica (HN), then applied as a novel surface protection material (SPM-HN). The effect of SPM-HN on surface hardness of mortar matrix exposed to seawater was investigated. Further, the microstructure was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and mercury intrusion porosimetry (MIP). The results show SPM-HN could significantly enhance the surface hardness of matrix in seawater curing, and the rebound number is increased by 94%.The microstructure analysis demonstrates that the incorporation of HN inhibits the formation of ettringite, thaumasite, and Friedel's salt. In addition, thermodynamic modeling shows the incorporation of hybrid nano-silica could generate more C-S-H, and decrease the maximum volume of Friedel's salt when SPM is exposed to seawater. This research indicates SPM-HN can be applied as a concrete protective layer in the marine environment.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9571614 | PMC |
| http://dx.doi.org/10.3390/polym14194080 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Prediction of Compressive Strength of Fly Ash-Recycled Mortar Based on Grey Wolf Optimizer-Backpropagation Neural Network.
Materials (Basel)
January 2025
School of Engineering, Computing and Mathematics, University of Plymouth, Plymouth PL4 8AA, UK.
The evaluation of the mechanical performance of fly ash-recycled mortar (FARM) is a necessary condition to ensure the efficient utilization of recycled fine aggregates. This article describes the design of nine mix proportions of FARMs with a low water/cement ratio and screens six mix proportions with reasonable flowability. The compressive strengths of FARMs were tested, and the influence of the water/cement ratio (/) and age on the compressive strength was analyzed.
View Article and Find Full Text PDFEffects of different lengths and doses of raw and treated sisal fibers in the cement composite material.
Sci Rep
January 2025
Department of Civil, Environmental, and Architectural Engineering, Worcester Polytechnic Institute, Worcester, USA.
Sisal fiber moisture sensitivity and degradation are treated by alkaline and pozzolanic methods, such as silica fume and kaolin surface coating. However, it is novel that the treatment of sisal fiber by calcined bentonite slurry can coat sisal fiber from moisture and protect it from cement hydration by consuming free lime and reducing cement matrix alkalinity. Therefore, the present study treated sisal fibers with calcined bentonite slurry and investigated the effect of using different lengths and doses of treated and raw sisal fibers in a mortar.
View Article and Find Full Text PDFUnveiling the Potential of Civil Briquette Furnace Slag as a Silico-Aluminon Additive in Alkali-Activated Materials.
Materials (Basel)
December 2024
Zhongtu Dadi International Architectural Design Co., Ltd., Shijiazhuang 050000, China.
Civil briquette furnace slag (FS), as a type of industrial solid waste, is not currently being recycled as a resource by the building materials industry. This study focuses on the potential of FS in the formulation of alkali-activated materials (AAMs) compared with calcium carbide slag (CS). This study encompasses three distinct AAM systems: alkali-activated fly ash alone (AAFA), fly ash-slag powder blends (AAFB), and slag powder alone (AABS).
View Article and Find Full Text PDFTensile Behavior Assessment of Grid-Type CFRP Textile-Reinforced Mortar with Different Design Variables.
Materials (Basel)
December 2024
Construction Technology Research Center, Construction Division, Korea Conformity Laboratories, 199, Gasan Digital 1-ro, Geumcheon-gu, Seoul 08503, Republic of Korea.
This study investigates the tensile behavior of carbon-fiber-reinforced polymer (CFRP) and textile-reinforced mortar (TRM) under various design variables to enhance understanding and application in construction structures. TRM reinforced with CFRP grids is highly effective for strengthening existing structures due to its lightweight nature, durability, ease of installation, and corrosion resistance. The research aims to evaluate how design parameters such as the CFRP grid type, mortar matrix strength (influenced by the water-to-cement ratio), specimen length, and grid width affect TRM's mechanical properties.
View Article and Find Full Text PDFExperimental study on recycling rubber to increase the impact resistance of cement mortar.
Sci Rep
October 2024
School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan, 232001, China.
The COVID-19 pandemic has led to a surge in medical waste generation, posing hazards to both the environment and global health. The impacts of the COVID-19 pandemic's medical waste hazard may persist long after the pandemic itself subsides. Improper disposal of medical waste can contaminate environment, posing risks to ecosystems and public health.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!