The flexible self-powered display system integrating a flexible triboelectric nanogenerator (TENG) and flexible alternating current electroluminescence (ACEL) has attracted increasing attention for its promising potential in human-machine interaction applications. In this work, a performance-enhanced MXene/cellulose nanofibril (CNF)/MXene-based TENG (MCM-TENG) is reported for powering a flexible patterned ACEL device in order to realize self-powered display. The MCM multilayer composite film was self-assembled through the layer-by-layer method. The MCM film concurrently acted as a triboelectric layer and electrode layer due to its high conductivity and strength. Moreover, the effect of CNF concentration and number of layers on the output performance of TENG was investigated. It was found that the MCM-TENG realized the optimum output performance. Finally, a flexible self-powered display device was realized by integrating the flexible TENG and ACEL. The MCM-TENG with an output voltage of ≈90 V at a frequency of 2 Hz was found to be efficient enough to power the ACEL device. Therefore, the as-fabricated flexible TENG demonstrates a promising potential in terms of self-powered displays and human-machine interaction.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9571373 | PMC |
| http://dx.doi.org/10.3390/ma15196770 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Engineering a wirelessly self-powered neural scaffold based on primary battery principle to accelerate nerve cell differentiation.
Colloids Surf B Biointerfaces
January 2025
State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; Jiangxi Province Key Laboratory of Additive Manufacturing of Implantable Medical Device, Jiangxi University of Science and Technology, Nanchang 330013, China. Electronic address:
Electrical stimulation displayed tremendous potential in promoting nerve regeneration. However, the current electrical stimulation therapy required complex traversing wires and external power sources, which significantly limited its practical application. Herein, a self-powered nerve scaffold based on primary battery principle was gradient printed by laser additive manufacturing technique.
View Article and Find Full Text PDFIn-Plane Bulk Photovoltaic Effect in a MoSe/NbOI Heterojunction for Efficient Polarization-Sensitive Self-Powered Photodetection.
Nano Lett
January 2025
Guangdong Provincial Key Laboratory of Optical Information Materials and Technology, Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou 510006, P. R. China.
Two-dimensional ferroelectric materials can generate a bulk photovoltaic effect, making them highly promising for self-powered photodetectors. However, their practical application is limited by a weak photoresponse due to a weak transition strength and wide band gap. In this study, we construct a van der Waals heterojunction using NbOI, which has significant in-plane polarization, with a highly absorbing MoSe layer.
View Article and Find Full Text PDFκ/β-GaO Type-II Phase Heterojunction.
Adv Mater
January 2025
Advanced Semiconductor Laboratory, Electrical and Computer Engineering Program, Division of Computer, Electrical, and Mathematical Sciences and Engineering (CEMSE), King Abdullah University of Science and Technology (KAUST), Thuwal, 23955-6900, Kingdom of Saudi Arabia.
Ultrawide-bandgap gallium oxide (GaO) holds immense potential for crucial applications such as solar-blind photonics and high-power electronics. Although several GaO polymorphs, i.e.
View Article and Find Full Text PDFPhotoelectrochemical-Type Photodetectors Based on Ball Milling InSe for Underwater Optoelectronic Devices.
Nanomaterials (Basel)
December 2024
College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, China.
In this paper, InSe nanosheets were synthesized by a ball milling method, and photoelectrochemical-type photodetectors (PEC PDs) based on the ball milling InSe (M-InSe) were fabricated using simulated seawater as the electrolyte. M-InSe nanosheets show good absorption in the visible region of 450-600 nm. The M-InSe PEC PDs display a good self-powered photoresponse under 525 nm irradiation, including a high responsivity of 0.
View Article and Find Full Text PDFProgramming Bifunctional Metal-Organic Frameworks to Integrate Multiple Triboelectric Nanogenerators for Green Electronics toward Effective Self-Powered Photocatalytic System.
ACS Appl Mater Interfaces
January 2025
College of Chemistry, Zhengzhou University, Zhengzhou 450001, P. R. China.
Programming and synthesizing bifunctional materials for regulating the output of triboelectric nanogenerators (TENGs) and their photocatalytic efficiency is a promising strategy for energy harvesting to build self-powered systems. Herein, we tackle this challenge by introducing metal-organic frameworks (MOFs) as molecular catalysts and triboelectric layers for self-powered photocatalytic systems. A zeolite-like mixed-valence MOF () and a ladder-structured MOF () were obtained through structural transformation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!