Purpose: Ponticulus posticus (PP) is a variation of the bone bridge that appears in the first cervical vertebra and through which the vertebral artery passes. Odontoid fractures are common spinal bone fractures in older people. This study aims to investigate the effect of neck movements on the odontoid and transverse atlantal ligament (TAL) of people with PP variation from a biomechanical view.
Method: C1, C2, and C3 vertebrae of the occipital bone were analyzed using the finite element method (FEM). In this study, solid models were created with the help of normal (N), incomplete (IC), and asymmetric complete (AC) PP tomography images. The necessary elements for the models were assigned, and the material properties were defined for the elements. As boundary conditions, models were fixed from the C3 vertebra, and 74 N loading was applied from the occipital bone. Stress and deformation values in the odontoid and transverse atlantal ligament were obtained by applying 1.8 Nm moment in flexion, extension, bending, and axial rotation directions.
Results: The stress and deformation values of all three models in odontoid and TAL were obtained, and numerical results were evaluated. In all models, stress and deformation values were obtained in decreasing order in rotation, bending, extension, and flexion movements. The highest stress and strain values were obtained in AC and the lowest values were obtained in N. In all movements of the three models, the stress and deformation values obtained in the TAL were lower than in the odontoid.
Conclusion: The greatest stresses and deformations obtained in spines (AC) with PP were found in the odontoid. This may help explain the pathogenesis of odontoid fractures in older people. First, this study explains the mechanism of the formation of neck trauma in people with PP and the need for a more careful evaluation of the direction of impact. Secondly, the study reveals that the rotational motion of the neck independent of PP has more negative effects on the odontoid.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.injury.2022.10.003 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A viscoelastic-plastic deformation model of hemisphere-like tip growth in Arabidopsis zygotes.
Quant Plant Biol
December 2024
Department of Mechanical Engineering, Faculty of Systems Science and Technology, Akita Prefectural University, Yurihonjo, Japan.
Plant zygote cells exhibit tip growth, producing a hemisphere-like tip. To understand how this hemisphere-like tip shape is formed, we revisited a viscoelastic-plastic deformation model that enabled us to simultaneously evaluate the shape, stress and strain of Arabidopsis () zygote cells undergoing tip growth. Altering the spatial distribution of cell wall extensibility revealed that cosine-type distribution and growth in a normal direction to the surface create a stable hemisphere-like tip shape.
View Article and Find Full Text PDFDamage analysis and grading control technology of surrounding rock in high geo-stress roadway.
Sci Rep
January 2025
Coal Mine Safety Mining Equipment Innovation Center of Anhui Province, Anhui University of Science and Technology, Huainan, 232001, China.
To investigate the failure mechanism and establish stability control methods for surrounding rock in high geo-stress roadways, this study incorporated the brittle failure characteristics of the surrounding rock mass into a unified strength criterion, developing an elastic-plastic theoretical model to represent rock damage and fracture. Using this model, analytical expressions for the damage rupture radius and stress field distribution are derived, leading to the proposal of a grading control method. The analysis of calculation examples reveals that an increase in stress, damage degree, and the brittleness coefficient of the rock mass results in the expansion of both the plastic damage and damage residual zones.
View Article and Find Full Text PDFStudy on the microstructural evolution mechanism of the angular contact ball bearing rings during the quenching and tempering process.
Sci Rep
January 2025
School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang, 471003, China.
Since the rings of the angular contact ball bearings (ACBBs) are typical highly sensitive quenching thin-walled structure, the microstructure and properties variation of the rings during the heat treatment process are often difficult to be controlled precisely, and then the service life of the bearings is reduced. Therefore, in this study, the combination of the numerical simulation and experimental was carried out during the quenching and tempering process of ACBBs (7008C), the phase transformation of the inner and outer ring during the heat treatment process were explored, and the law of the microstructure evolution and the mechanical properties variation were revealed. Firstly, based on the multi-field coupling theory of temperature, microstructure and stress-strain field, the numerical simulation model of the heat treatment process of the bearing rings was established.
View Article and Find Full Text PDFStrong, ductile, and hierarchical hetero-lamellar-structured alloys through microstructural inheritance and refinement.
Proc Natl Acad Sci U S A
January 2025
Department of Materials Science and Engineering, Hong Kong Institute for Advanced Study, City University of Hong Kong, Hong Kong, China.
The strength-ductility trade-off exists ubiquitously, especially in brittle intermetallic-containing multiple principal element alloys (MPEAs), where the intermetallic phases often induce premature failure leading to severe ductility reduction. Hierarchical heterogeneities represent a promising microstructural solution to achieve simultaneous strength-ductility enhancement. However, it remains fundamentally challenging to tailor hierarchical heterostructures using conventional methods, which often rely on costly and time-consuming processing.
View Article and Find Full Text PDFIn situ structural-functional synchronous dissection of dynamic neuromuscular system via an integrated multimodal wearable patch.
Sci Adv
January 2025
Neural Engineering Centre, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China.
Neuromuscular abnormality is the leading cause of disability in adults. Understanding the complex interplay between muscle structure and function is crucial for effective treatment and rehabilitation. However, the substantial deformation of muscles during movement (up to 40%) poses challenges for accurate assessment.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!