Fabrication of sodium alginate-melamine@ZIF-67 composite hydrogel and its adsorption application for Pb(II) in wastewater.

A low-cost and environmental-friendly sodium alginate-melamine@zeolitic imidazolate framework-67 (SA-ME@ZIF-67) adsorbent was fabricated by chemical grafting and in situ growth for the removal of lead ions in wastewater. Firstly, melamine (ME) was grafted onto sodium alginate (SA) by amide reaction, and then SA-ME was dropped into a solution of calcium chloride to form hydrogel bead, and ZIF-67 was grown on the SA-ME hydrogel bead by the in situ growth method. The SA-ME@ZIF-67 adsorbent was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The SA-ME@ZIF-67 adsorbent was used to effectively adsorb Pb(II) from aqueous solutions. The initial concentrations of lead ions, adsorbent dose, initial pH of lead ion solution, temperature, and adsorption time for the material were optimized. The adsorption isotherms and kinetics fitted to Langmuir isotherm model (R = 0.9281, 0.9420, and 0.9623 at the temperatures of 288.15 K, 298.15 K, and 308.15 K, respectively) and pseudo-second-order kinetic model (R = 0.9901) respectively. According to the Langmuir model at 308.15 K, the maximum adsorption capacity of the adsorbent for Pb(II) was 634.99 mg/g. The recycling application of the adsorbent was possible as it was easily collected and reused after five adsorption-regeneration cycles. In addition, the Pb(II) in real wastewater samples has been efficiently removed using the fabricated hydrogel. The results showed that the SA-ME@ZIF-67 adsorbent had high adsorption capacity, removal efficiency, and easy recyclability for Pb(II).