AI Article Synopsis

  • Charcoal is widely used as a biofuel for cooking and industrial purposes, but its ignition requires safe materials known as Charcoal-Ignition-Aiders (CIA), which can emit harmful gases.
  • A study found that using paper as a CIA resulted in the lowest carbon monoxide emissions, though all CIA options resulted in volatile organic compounds exceeding safety standards.
  • The research highlighted significant differences in charcoal usage based on socio-demographic factors, recommending a combination of wood from specific trees and paper for safer and more efficient combustion.

Article Abstract

Charcoal is a popular form of biofuel embraced for domestic and industrial purposes. However, the use of Charcoal has some associated challenges, such as the required charcoal pot and setting it into the fire at first by using Charcoal-Ignition-Aiders (CIA) (e.g. discarded paper, nylon, rubber, plastics, petrol, the residue of processed palm oil, maise cob, wood, and kerosene). Coupled with the chemical properties of Charcoal, the resulting gases from CIA are capable of polluting the environment with perceived Adverse-Health-Implications (AHI) on the ecosystem. Therefore, this study conducted a safety assessment of charcoal biofuel usage and the effects of common CIA on combustion indices. This study followed standard methods and the use of peculiar equipment. This study established that Charcoal is commonly used in the studied area because it is cheap, readily available and requires less technical know-how. Considering the combustion indices, using paper as a CIA generated the lowest carbon monoxide (CO) value, 28.1 ppm, with 3,434.54 ppm volatile organic compound, VOC. Compared with the ACGIH standard permissible exposure level of ≤ 30 ppm, the paper gave a lesser CO value of 28.10 ppm among all the CIA. At the same time, all the CIA recorded higher VOC compared with EPA standard permissible exposure level of ≤ 15 ppm. ANOVA analysis conducted on the socio-demographic profile of the respondents, cooking attributes of the respondents, and use of charcoal pot types by the respondents in Zone 1, Zone 2, and Zone 3 gave p-values of 0.032, 0.028, and 0.039, respectively. These imply significant differences within the zones in each of the indices. The average energy content reported for charcoals sourced from oak trees, afara, obeche, mahogany, and iroko woods is 3,2149 kJ/kg compared to the lower ones. Therefore, this study recommended using these charcoals alongside discarded paper as CIA because they are a better combination to reduce AHI.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9547877PMC
http://dx.doi.org/10.1038/s41598-022-21059-wDOI Listing

Publication Analysis

Top Keywords

combustion indices
12
charcoal
9
safety assessment
8
assessment charcoal
8
usage effects
8
effects common
8
charcoal pot
8
discarded paper
8
paper cia
8
voc compared
8

Similar Publications

Polycyclic aromatic hydrocarbons (PAHs) are pervasive organic pollutants in the environment that are formed as an outcome of partial combustion of organic matter. PAHs pose a significant threat to ecological systems and human health due to their cytotoxic and genotoxic effects. Therefore, an immediate need for effective PAH remediation methods is crucial.

View Article and Find Full Text PDF

In order to accurately investigate the key microstructures in the spontaneous combustion exothermic process of coal, an ultrasonic extraction method was employed to extract the coal, and the complex microscopic groups within it were stripped and studied. On this basis, Fourier transform infrared spectroscopy and differential scanning calorimetry were employed to assess the content of microscopic groups and the exothermic characteristics of the raw and extracted coal samples. The findings indicated that toluene and methanol demonstrated a notable capacity for extracting aromatic and aliphatic hydrocarbon compounds from coal, whereas -methyl pyrrolidone (NMP) and ethylenediamine (EDA) exhibited a pronounced effect on oxygen-containing functional groups and hydroxyl groups.

View Article and Find Full Text PDF

Extracellular polymeric substances (EPS) significantly influence the properties and performance of waste activated sludge. Various pretreatment protocols with different extraction efficiency and characteristics of EPS have been reported, which markedly impact subsequent treatment and disposal of sewage sludge. This study systematically assesses the EPS properties from twelve extraction pretreatment methods.

View Article and Find Full Text PDF

Determination and validation of polycyclic aromatic hydrocarbons (PAH4) in katsuobushi, plant-based food supplements, and cocoa bean shells using GC-MS/MS.

J Food Drug Anal

December 2024

Division of Research and Analysis, Taiwan Food and Drug Administration, Ministry of Health and Welfare, No.161-2, Kunyang St, Nangang District, Taipei City 11561, Taiwan, R.O.C.

Polycyclic aromatic hydrocarbons (PAHs) are primarily generated through the incomplete combustion or pyrolysis of organic materials in various industrial processes. Foods may become contaminated with environmental PAHs found in air, soil, or water, or through industrial food processing methods such as smoking, roasting, drying, and grilling. The Ministry of Health and Welfare in Taiwan has established maximum levels for benzo[a]pyrene (BaP) and indicative values for BaP as well as PAH4 (the sum of benz[a]anthracene, chrysene, benzo[b]fluoranthene, and benzo[a]pyrene) in foods as operational guidelines.

View Article and Find Full Text PDF

Study of hydrophobic cemented paste backfill (H-CPB) to prevent sulphate attack.

Heliyon

November 2024

Department of Mining Engineering, Faculty of Engineering, Hadimkoy Campus, Istanbul University - Cerrahpasa, 34500, Istanbul, Turkiye.

One of the challenges encountered in mining is acid mine drainage (AMD) in sulphurous ores in response to rainfall and groundwater. CPB one of the most prevalent waste management systems addresses this issue today. Nevertheless, in the long term, the concretion in CPB may become ineffective because of external factors, such as groundwater and rainfall.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!