From In Vitro to Perioperative Vascular Tissue Engineering: Shortening Production Time by Traceable Textile-Reinforcement.

Tissue Eng Regen Med

Department of Biohybrid and Medical Textiles (BioTex), Center for Biohybrid Medical Systems (CBMS), Institute for Applied Medical Engineering, RWTH Aachen University, Forckenbeckstr. 55, 52074, Aachen, Germany.

Published: December 2022

Background: The production of tissue-engineered vascular graft (TEVG) usually involves a prolonged bioreactor cultivation period of up to several weeks to achieve maturation of extracellular matrix and sufficient mechanical strength. Therefore, we aimed to substantially shorten this conditioning time by combining a TEVG textile scaffold with a recently developed copolymer reinforced fibrin gel as a cell carrier. We further implemented our grafts with magnetic resonance imaging (MRI) contrast agents to allow the in-vitro monitoring of the TEVG's remodeling process.

Methods: Biodegradable polylactic-co-glycolic acid (PLGA) was electrospun onto a non-degradable polyvinylidene fluoride scaffold and molded along with copolymer-reinforced fibrin hydrogel and human arterial cells. Mechanical tests on the TEVGs were performed both instantly after molding and 4 days of bioreactor conditioning. The non-invasive in vitro monitoring of the PLGA degradation and the novel imaging of fluorinated thermoplastic polyurethane (F-TPU) were performed using 7T MRI.

Results: After 4 days of close loop bioreactor conditioning, 617 ± 85 mmHg of burst pressure was achieved, and advanced maturation of extracellular matrix (ECM) was observed by immunohistology, especially in regards to collagen and smooth muscle actin. The suture retention strength (2.24 ± 0.3 N) and axial tensile strength (2.45 ± 0.58 MPa) of the TEVGs achieved higher values than the native arteries used as control. The contrast agents labeling of the TEVGs allowed the monitorability of the PLGA degradation and enabled the visibility of the non-degradable textile component.

Conclusion: Here, we present a concept for a novel textile-reinforced TEVG, which is successfully produced in 4 days of bioreactor conditioning, characterized by increased ECM maturation and sufficient mechanical strength. Additionally, the combination of our approach with non-invasive imaging provides further insights into TEVG's clinical application.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9679079PMC
http://dx.doi.org/10.1007/s13770-022-00482-0DOI Listing

Publication Analysis

Top Keywords

bioreactor conditioning
12
maturation extracellular
8
extracellular matrix
8
sufficient mechanical
8
mechanical strength
8
contrast agents
8
4 days bioreactor
8
plga degradation
8
vitro perioperative
4
perioperative vascular
4

Similar Publications

Mesenchymal stromal cell-derived extracellular vesicles (MSC-EVs) have been reported to hold great potential as cell-free therapies due to their low immunogenicity and minimal toxicity. However, the large doses of MSC-EVs that are required for their clinical application highlight the urgency of finding a large-scale system for MSC-EV manufacture. In this study, we aimed to set up a hollow fiber bioreactor system for the continuous homogenous production of functional and high-quality MSC-EVs.

View Article and Find Full Text PDF

Functional outcome of cell seeded tracheal scaffold after mechanical stress in vitro.

Biomater Adv

February 2025

Department of Cardio-thoracic surgery, Radboud University Medical Center, Geert Grooteplein 28, 6525 GE Nijmegen, the Netherlands.

Tracheal tissue engineering is still facing major challenges: realization of efficient vascularization and mechanical properties comparable to native trachea need to be achieved. In this study, we present a strategy for the manufacturing of a construct for tracheal tissue engineering by conditioning through cell seeding followed by mechanical stimulation in vitro. Scaffolds derived from porcine trachea decellularized with supercritical carbon dioxide were seeded with stem cells of different tissue sources and cultured in a bioreactor for 21 days under mechanical stimulation.

View Article and Find Full Text PDF

Novel Bioreactor Design for Non-invasive Longitudinal Monitoring of Tissue-Engineered Heart Valves in 7T MRI and Ultrasound.

Ann Biomed Eng

October 2024

Department of Biohybrid & Medical Textile (BioTex), Center for Biohybrid Medical Systems (CBMS), Institute for Applied Medical Engineering, RWTH Aachen University, Forckenbeckstr. 55, 52074, Aachen, Germany.

The development of cardiovascular implants is abundant, yet their clinical adoption remains a significant challenge in the treatment of valvular diseases. Tissue-engineered heart valves (TEHV) have emerged as a promising solution due to their remodeling capabilities, which have been extensively studied in recent years. However, ensuring reproducible production and clinical translation of TEHV requires robust longitudinal monitoring methods.

View Article and Find Full Text PDF

Perfusion Bioreactor Conditioning of Small-diameter Plant-based Vascular Grafts.

Tissue Eng Regen Med

December 2024

Bioengineering Program, Fred DeMatteis School of Engineering and Applied Science, Hofstra University, 229 Science and Innovation Center, Hempstead, NY, 11549, USA.

Article Synopsis
  • Vascular grafts typically made from synthetic materials face issues like thrombosis and intimal hyperplasia, especially in small diameters, prompting research into alternative options such as decellularized plant scaffolds.* -
  • The study developed a novel bioreactor to precondition small-diameter vascular grafts made from decellularized leatherleaf viburnum, simulating physiological conditions to enhance cell density and reduce thrombus formation.* -
  • Results showed that bioreactor conditioning improved the grafts’ endothelial cell density and suture retention while maintaining cell viability, indicating the potential of these plant-based grafts for vascular repair with lower risk of blood clots.*
View Article and Find Full Text PDF

Raman laser intensity and sample clarification on biochemical monitoring over Zika-VLP upstream stages.

Biochem Biophys Res Commun

November 2024

Laboratório de Engenharia de Bioprocessos. Escola de Artes, Ciências e Humanidades (EACH), Universidade de São Paulo, Rua Arlindo Béttio, 1000, CEP 03828-000, São Paulo, SP, Brazil. Electronic address:

In the current biopharmaceutical scenario, constant bioprocess monitoring is crucial for the quality and integrity of final products. Thus, process analytical techniques, such as those based on Raman spectroscopy, have been used as multiparameter tracking methods in pharma bioprocesses, which can be combined with chemometric tools, like Partial Least Squares (PLS) and Artificial Neural Networks (ANN). In some cases, applying spectra pre-processing techniques before modeling can improve the accuracy of chemometric model fittings to observed values.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!