Globally, contamination of water by dyes and heavy metals (HMs) is a serious environmental and public health problem due to their carcinogenic and mutagenic nature. It is incumbent to treat innocuously before discharge. It is the first time, hexagonal zinc oxide (ZnO) microstructure are being employeed as a membrane in the simultaneous removal of methyl orange (MO) and chromium (Cr (VI)) from the aqueous solution. The surface chemistry of hexagonal ZnO was characterized for morphology, surface functional groups, crystalline nature, and elemental composition by scanning electron microscope (SEM), Fourier transmission infrared spectroscopy (FTIR), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). Adsorption capacity and removal efficiency was determined by the laboratory batch adsorption experiments, while nonlinear, linear kinetics and isotherm models were fitted to experimental data to investigate the adsorption process. The results exhibited that the maximum adsorption capacity (q) of hexagonal ZnO from the Langmuir isotherm model was 80.39 mg g and 84.10 mg g for MO and Cr (VI) respectively. According to the modeling findings, linear langmuir fitted to the experimental data with R 0.967 and 0.971 for both MO and Cr (VI) which indicates monolayer physical adsorption of both pollutants has taken place. Whereas, kinetic study showed nonlinear pseudo-second order with R 0.989 and 0.986 for MO and Cr (VI) model best fitted with the experimental data. The values of thermodynamics parameters Gibbs free energy change ΔG°, heat of enthalpy ΔH° and, heat of entropy ΔS° indicate that spontaneous, endothermic, and irreversible adsorption reactions occurred. Overall, it is concluded from our observations that hexagonal ZnO has the potential to be used as an eco-friendly, cost-effective adsorbent for simultaneous remaoval of both MO and Cr (VI) from water. Findings of the current investigation provide valuable insights for the development of an inexpensive, effective and sustainable filtration method for the treatment of MO and Cr (VI) synergistically.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.chemosphere.2022.136681 | DOI Listing |
J Fluoresc
December 2024
National Institute of Lasers and Optronics College, Pakistan Institute of Engineering and Applied Sciences, Nilore, Islamabad, 45650, Pakistan.
Fluorescence spectroscopy employed to compute the antibacterial potential of pure ZnO and Titania (TiO) loaded ZnO (TiO: 2%, 4%, 6%, and 8%) electrospun nanofibers. The study of electrospun nanofibers followed by their structural, morphological and antibacterial properties has been revealed through fluorescence spectroscopy. X-ray diffraction (XRD) analysis of nanofibers calcinated at 600 °C revealed the presence of polycrystalline wurtzite hexagonal crystallographic planes of ZnO with preferred orientation along (101) direction.
View Article and Find Full Text PDFNanomaterials (Basel)
December 2024
Guangdong Provincial Key Laboratory of Electronic Functional Materials and Devices, Huizhou University, Huizhou 516007, China.
W-doped ZnO (WZO) films were deposited on glass substrates by using RF magnetron sputtering at different substrate bias voltages, and the relationships between microstructure and optical and electrical properties were investigated. The results revealed that the deposition rate of WZO films first decreased from 8.8 to 7.
View Article and Find Full Text PDFNanomaterials (Basel)
December 2024
Department of Industrial and Information Engineering and Economics, University of L'Aquila, Piazzale E. Pontieri 1, Monteluco di Roio, Roio Poggio, 67100 L'Aquila, AQ, Italy.
The aim of the present paper is to propose an innovative, one-step and sustainable process allowing us to obtain almost 10 kg/week of pure and crystalline simonkolleite nanoparticles (SK NPs) in only 8 min of reaction, working in water, under ambient conditions of pressure/temperature, guaranteeing at the same time low environmental impact and a high yield of NP production. In addition, the obtained NPs can also act as ZnO precursors at ambient temperature, and this result supports the sustainability of the process considering that, generally, the production of ZnO from SK occurred via annealing at high temperatures. The SK NPs appeared pure and crystalline, characterized by a highly uniform hexagonal lamellar feature.
View Article and Find Full Text PDFTalanta
December 2024
Thin Films and Materials Science Research Laboratory, Department of Physics, Dayanand Science College, Latur, Maharashtra, 413512, India. Electronic address:
In this study, we report the synthesis, optical characterization and ultra-sensitive ammonia gas sensing properties of Mg-doped ZnO cauliflower like nanostructures obtained via chemical spray pyrolysis technique. The morphological and structural properties of the prepared films were investigated by Field Emission Scanning electron microscope (FESEM) and X-ray diffraction (XRD). Gas sensing and optical characterizations were carried out using Keithley electrometer and Uv-Vis.
View Article and Find Full Text PDFCryst Growth Des
December 2024
Materials Chemistry Center, Department of Chemistry, University College London, 20 Gordon Street, London WC1H 0AJ, U.K.
Mo-doped ZnO (MZO), F-doped ZnO (FZO), and Mo/F-codoped ZnO (MFZO) films have been deposited using a simple, cheap, and effective thin-film preparation route, aerosol-assisted chemical vapor deposition (AACVD). ZnO was successfully doped with Mo and/or F, confirmed by X-ray photoelectron spectroscopy (XPS) and by a decrease in unit cell parameters from X-ray diffraction (XRD). XRD also confirmed that all of the films had hexagonal wurtzite ZnO structures.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!