Slight crack of cottonseed is a critical factor influencing the germination rate of cotton due to foamed acid or water entering cottonseed through testa. However, it is very difficult to detect cottonseed with slight crack using common non-destructive detection methods, such as machine vision, optical spectroscopy, and thermal imaging, because slight crack has little effect on morphology, chemical substances or temperature. By contrast, the acoustic method shows a sensitivity to fine structure defects and demonstrates potential application in seed detection. This paper presents a novel method to detect slightly cracked cottonseed using air-coupled ultrasound with a light-weight vision transformer (ViT) and a sound-to-image encoding method. The echo signal of air-coupled ultrasound from cottonseed is obtained by non-contact and non-destructive methods. The intrinsic mode functions (IMFs) of ultrasound signal are obtained as the sound features using variational mode decomposition (VMD) approach. Then the sound features are converted into colorful images by a color encoding method. This method uses different colored lines to represent the changes of different values of IMFs according to the specified encoding period. A light-weight MobileViT method is utilized to identify the slightly cracked cottonseeds using encoding colorful images corresponding to cottonseeds. The experimental results show an average overall recognition accuracy of 90.7% for slightly cracked cottonseed from normal cottonseed, which indicates that the proposed method is reliable to applications in detection task of cottonseed with slight crack.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9520625 | PMC |
http://dx.doi.org/10.3389/fpls.2022.956636 | DOI Listing |
Clin Oral Investig
December 2024
Departament of Clinic Dentistry, UFF- Universidade Federal Fluminense, Niterói, RJ, Brazil.
Objectives: This study aimed to investigate cracked teeth and vertical root fracture observable on micro-CT images of extracted roots of mandibular incisors, after fiber post removal.
Materials And Methods: Thirty mandibular incisors were selected with any degree of slight incisal wear inspected with the aid of a stereomicroscope under 12x magnification, in order to have a group of young adult specimens according to the criteria of Hugoson et al. A sample of twelve mandibular incisors were selected, aged between 20 and 30 years old, with similar dentine volume and thickness.
Materials (Basel)
December 2024
College of Geosciences and Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450046, China.
In this paper, uniaxial compression tests and numerical simulation were conducted on specimens of five sizes, and the influence of specimen size on the failure characteristics and mechanics of specimens was studied. The results show that when the bottom size of the specimen is the same, with the increase in the height-width ratio of the specimen size (from 1 to 3), the peak stress of the specimen gradually decreases, but when the decrease is greatly reduced, the concentration of contact force chains in the model increases. The failure mode of the specimen changes from tensile failure to shear failure, and the distribution of cracks changes from multiple vertical cracks uniformly to a concentrated main oblique crack.
View Article and Find Full Text PDFSci Rep
November 2024
School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin, 300401, China.
The frost heave failure mechanism of fractured rock mass is a complicated problem faced by engineering construction in cold area. In this study, low temperature frost heave test and post-freezing uniaxial compression test on sandstone samples with a water-filled flaw were carried out. The frost heave cracking mode, frost heave pressure, frost heave cracking criterion and the effect of frost heave-induced cracks on post-freezing uniaxial compression failure behavior under different flaw inclination angles (0 ~ 90°) and freezing temperatures (-10~-40 °C) were investigated.
View Article and Find Full Text PDFPLoS One
November 2024
Department of Construction Technology & Management, Woldia University, Woldia City, Ethiopia.
The present work explores the microstructures and abrasive wear behavior of AISI 410 and AISI 420 martensitic stainless steels after hardening and tempering. Microstructural changes and wear were analyzed using optical microscopy and SEM. Different heat treatments resulted in varying hardness values, with a slight increase at 723 K due to (Fe,Cr)23C6 formation, and a significant reduction at 873 K.
View Article and Find Full Text PDFJ Esthet Restor Dent
November 2024
Department of Restorative Dentistry, Faculty of Dentistry, Istanbul Kent University, Istanbul, Türkiye.
Objective: To investigate the surface roughness on cementoenamel junction after application of various rubber-dam retraction clamps for different durations.
Materials And Methods: Fifty-four extracted human molar teeth were used. Various retraction clamps were placed on the cementoenamel junction.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!