Development of a Nafion-MWCNTs and in-situ generated Au nanopopcorns dual-amplification electrochemical aptasensor for ultrasensitive detection of OTA.

Trace detection of ochratoxin A (OTA) in foods is essential to mitigate risks to human health. Herein, a label-free electrochemical (EC) aptasensor based on dual-signal amplification of Nafion dispersed multi-walled carbon nanotubes (Nafion-MWCNTs) and Au nanopopcorns was developed for ultrasensitive detection of OTA. Nafion solution prevented the leaching of MWCNTs, and the Nafion-MWCNTs modified screen-printed carbon electrode (SPCE) acted as the sensing substrate which facilitated the uniform distribution of the electrodeposited Au nanopopcorns. The in-situ generated Au nanopopcorns could not only load a large amount of aptamers for specific identification of OTA, but also promote the electron transfer of the sensing platform. The incorporation of Nafion-MWCNTs and Au nanopopcorns realized dual-amplification of the aptasensor due to the enhanced conductivity and the increased electroactive surface area of the electrode. The modified electrodes were characterized through scanning electron microscopy, X-ray photoelectron spectroscopy and EC evaluation. Under optimal conditions, the electrochemical impedance spectroscopy (EIS) was measured for the determination of OTA. The as-fabricated Au nanopopcorns/Nafion-MWCNTs impedimetric aptasensor displayed excellent sensitivity with a detection limit as low as 1 pg/mL and a wide linear range of 1 pg/mL-10 ng/mL for OTA. Practical application of the aptasensor in the spiked malt samples achieved satisfactory recoveries of 89.82-95.65 %, which was also successfully verified to detect OTA in eleven batches of actual malt samples collected from the local market. The creative aptasensor is simple, cost-effective, sensitive, and accurate, showing great promise for on-site monitoring of other trace contaminants in foods by simply replacing the aptamers.