Low-temperature synthesis of 2D anisotropic MoTe using a high-pressure soft sputtering technique.

We demonstrate a high-pressure soft sputtering technique that can grow large area 1T' phase MoTe sheets on HOPG and AlO substrates at temperatures as low as 300 °C. The results show that a single Mo/Te co-sputtering step on heated substrates produces highly defected films as a result of the low Te sticking coefficient. The stoichiometry is significantly improved when a 2-step technique is used, which first co-sputters Mo and Te onto an unheated substrate and then anneals the deposited material to crystalize it into 1T' phase MoTe. A MoTe 1T' film with the lowest Te vacancy content ( = 0.14) was synthesized using a 300 °C annealing step, but a higher processing temperature was prohibited due to MoTe decomposition with an activation energy of 80.7 kJ mol. However, additional thermal processing at ∼1 torr tellurium pressure can further reduce the Te-vacancy (V) concentration, resulting in an improvement in the composition from MoTe to MoTe. Hall measurements indicate that the films produced with the 2-step process are n-type with a carrier concentration of 4.6 × 10 cm per layer, presumably from the large V concentration stabilizing the 1T' over the 2H phase. Our findings (a) demonstrate that large scale synthesis of tellurium based vdW materials is possible using industrial growth and processing techniques and (b) accentuate the challenges in producing stoichiometric MoTe thin films.