Resistive gas sensors are considered promising candidates for gas detection, benefiting from their small size, ease of fabrication and operation convenience. The development history, performance index, device type and common host materials (metal oxide semiconductors, conductive polymers, carbon-based materials and transition metal dichalcogenides) of resistive gas sensors are firstly reviewed. This review systematically summarizes the functions, functional mechanisms, features and applications of seven kinds of guest materials (noble metals, metal heteroatoms, metal oxides, metal-organic frameworks, transition metal dichalcogenides, polymers, and multiple guest materials) used for the modification and optimization of the host materials. The introduction of guest materials enables synergistic effects and complementary advantages, introduces catalytic sites, constructs heterojunctions, promotes charge transfer, improves carrier transport, or introduces protective/sieving/enrichment layers, thereby effectively improving the sensitivity, selectivity and stability of the gas sensors. The perspectives and challenges regarding the host-guest hybrid materials-based gas sensors are also discussed.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9426293 | PMC |
| http://dx.doi.org/10.1039/d2ra04063h | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fast is fine, but accuracy is everything: making intraoperative transfusion decisions using point-of-care testing.
Br J Anaesth
February 2025
Transfusion Research Unit, Department of Public Health and Preventative Medicine, Monash University, Melbourne, VIC, Australia; Department of Clinical Haematology, Monash Health, Clayton, VIC, Australia.
Accurate and timely diagnostic information is a vital adjunct to clinical assessment to inform therapeutic decision-making, including decisions to transfuse, or not transfuse, blood components. A prospective cohort study of diagnostic point-of-care (POC) haemoglobin measurements on arterial or central venous samples from adults undergoing major noncardiac surgery compared three widely used devices, HemoCue®, i-STAT™, and the Rad-67™ pulse CO-Oxymeter® finger sensor device, against standard laboratory haemoglobin measurements, but importantly not against a blood gas analyser. The study focused on haemoglobin results below 100 g L to establish the utility of these devices to guide red cell transfusion decisions.
View Article and Find Full Text PDFDetection of Breath Nitric Oxide at Ppb Level Based on Multiperiodic Spectral Reconstruction Neural Network.
Anal Chem
January 2025
School of Electrical Engineering, Yanshan University, Qinhuangdao 066004, China.
As breath nitric oxide (NO) is a biomarker of respiratory inflammation, reliable techniques for the online detection of ppb-level NO in exhaled breath are essential for the noninvasive diagnosis of respiratory inflammation. Here, we report a breath NO sensor based on the multiperiodic spectral reconstruction neural network. First, a spectral reconstruction method that transforms a spectrum from the wavelength domain to the intensity domain is proposed to remove noise and interference signals from the spectrum.
View Article and Find Full Text PDFIntercomparison of in-well, depth profile and online soil gas measurements for estimating petroleum natural source zone depletion rates: Will in-well gas samples suffice?
J Hazard Mater
January 2025
BP Australia Pty Ltd, Melbourne, Victoria 3000, Australia.
Natural Source Zone Deletion (NSZD) is a viable long-term management option for sites impacted by petroleum hydrocarbon fuels. NSZD rate estimation methods for petroleum mass losses often use soil gas gradients of oxygen, carbon dioxide, methane or vapour concentrations through the vadose zone. Seeking greater efficiencies, we investigated if existing short-screened wells are reliable for representative sampling of soil gases in a vadose zone undergoing NSZD.
View Article and Find Full Text PDFOptimizing Point-in-Space Continuous Monitoring System Sensor Placement on Oil and Gas Sites.
ACS Sustain Resour Manag
January 2025
Department of Applied Mathematics and Statistics, Colorado School of Mines, Golden, Colorado 80401, United States.
We propose a generic, modular framework to optimize the placement of point-in-space continuous monitoring system sensors on oil and gas sites aiming to maximize the methane emission detection efficiency. Our proposed framework substantially expands the problem scale compared to previous related studies and can be adapted for different objectives in sensor placement. This optimization framework is comprised of five steps: (1) simulate emission scenarios using site-specific wind and emission information; (2) set possible sensor locations under consideration of the site layout and any site-specific constraints; (3) simulate methane concentrations for each pair of emission scenario and possible sensor location; (4) determine emissions detection based on the site-specific simulated concentrations; and (5) select the best subset of sensor locations, under a given number of sensors to place, using genetic algorithms combined with Pareto optimization.
View Article and Find Full Text PDFInterest in carbon dioxide (CO) sensors is growing rapidly due to the increasing awareness of the link between air quality and health. Indoor, high CO levels signal poor ventilation, and outdoor the burning of fossil fuels and its associated pollution. CO gas sensors based on integrated optical waveguides are a promising solution due to their excellent gas sensing selectivity, compact size, and potential for mass manufacturing large volumes at low cost.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!