Silicon (Si) is an attractive anode material for Li-ion batteries (LIBs) due to its high theoretical specific capacity. However, the solid-electrolyte interphase (SEI) formation, caused by liquid electrolyte decomposition, often befalls Si electrodes. The SEI layer is less Li-ion conductive, which would significantly inhibit Li-ion transport and delay the reaction kinetics. Understanding the interaction between the SEI components and Li-ion diffusion is crucial for further improving the cycling performance of Si. Herein, different liquid electrolytes are applied to investigate the induced SEI components, structures, and their role in Li-ion transport. It is found that Si electrodes exhibit higher discharge capacities in LiClO-based electrolytes than in LiPF-based electrolytes. This behavior suggests that a denser and more conductive SEI layer is formed in LiClO-based electrolytes. In addition, a coating of a LiPO artificial SEI layer on Si suppresses the formation of natural SEI formation, leading to higher capacity retentions. Furthermore, galvanostatic intermittent titration technique (GITT) measurements are applied to calculate Li-ion diffusion coefficients, which are found in the range of 10-10 m/s.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9476167PMC
http://dx.doi.org/10.1021/acsomega.2c04415DOI Listing

Publication Analysis

Top Keywords

sei formation
12
sei layer
12
li-ion transport
8
sei components
8
li-ion diffusion
8
liclo-based electrolytes
8
sei
7
li-ion
6
influence sei
4
formation
4

Similar Publications

The development of aqueous zinc metal batteries (AZMBs) is hampered by dendrites and side reactions induced by reactive HO. In this study, a hydrated eutectic electrolyte with restrictive water consisting of zinc trifluoromethanesulfonate (Zn(OTf)), 1,3-propanediol (PDO), and water is developed to improve the stability of the anode/electrolyte interface in AZMBs via the formation of a water-deficient interface. Additionally, PDO participates in the Zn solvation structure and inhibits the movement of water molecules.

View Article and Find Full Text PDF

Enhancing Interfacial Interactions Through Microwave-Irradiated Reduction for the Recycling of Photovoltaic Silicon Waste for Lithium Storage.

Small

January 2025

School of Energy Science and Engineering and Jiangsu Key Laboratory of Process Enhancement and New Energy Equipment Technology, Nanjing Tech University, Nanjing, Jiangsu Province, 211816, China.

The application of micro-nano size photovoltaic waste silicon (wSi) as an anode material for lithium-ion battery holds significant practical potential; However, it faces a series of challenges related to the volume expansion of Si during cycling. In this study, a simple, efficient, and eco-friendly microwave method is proposed for the rapid preparation of graphene-coated silicon materials (wSi@rGO) in just a few seconds, in which graphene as the stable interface mitigates structural failure caused by significant volume expansion, enhances electron and ion conductivity, inhibits undesirable side reactions between silicon and electrolyte, and promotes the stability of solid electrolyte interface (SEI). Importantly, the instantaneous high temperature generated by microwaves facilitates the formation of interfacial SiC chemical bonds, which strengthen the interaction between Si and graphene, thereby reducing Si delamination.

View Article and Find Full Text PDF

Sodium-ion batteries (SIBs) have the advantages of abundant resources and low cost, making them potential candidates for the next-generation large-scale energy storage technology. However, the capacity fade during cycling used in sodium-ion batteries is a major challenge. The rational design of the electrolyte is one of the ways to solve these problems.

View Article and Find Full Text PDF

The SiO electrode interface is passivated with a SiO layer, which hinders the deposition of an inorganic solid electrolyte interphase (SEI) due to its high surface work function and low exchange current density of electrolyte decomposition. Consequently, a thermally vulnerable, organic-based SEI formed on the SiO electrode, leading to poor cycling performance at elevated temperatures. To address this issue, the SEI formation process is thermoelectrochemically activated.

View Article and Find Full Text PDF

A highly contagious infection caused by human adenovirus species D (HAdV-D), epidemic keratoconjunctivitis (EKC) results in corneal subepithelial infiltration (SEI) by leukocytes, the hallmark of the infection. To date, the pathogenesis of corneal SEI formation in EKC is unresolved. HMGB1 (high-mobility group box 1 protein) is an alarmin expressed in response to infection and a marker of sepsis.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!