Background: Global sustainability is a major health concern facing our planet today. The healthcare sector is a significant contributor to environmentally damaging activity. Reusable cloths should be considered as an environmentally friendly alternative to the predominantly used single-use surface wipes in cleaning and disinfection of environmental surfaces in healthcare settings.
Aim: To conduct a rapid review of current policies on surface decontamination in healthcare settings; then to carry out a life cycle impact assessment (LCIA) of reusable cotton and microfibre cloths versus conventional single-use cloths, with three compatible disinfectants.
Methods: Seven countries were included in the rapid review of policies. For the LCIA, inputs, outputs, and processes across the life cycle were included, using EcoInvent database v3.7.1 and open LCIA software. Sixteen European-recommended environmental impact categories and eight human health categories were considered.
Findings: Infection prevention policies examined do not require single-use wipes for cleaning and disinfection. The disinfectant with the highest environmental impact was isopropyl alcohol. The most environmentally sustainable option for clinical surface decontamination was the microfibre cloth when used with a quaternary ammonium compound. The least environmentally sustainable option was cotton with isopropyl alcohol.
Conclusion: Impacts were primarily attributed with the use of the disinfectant agent and travel processes.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhin.2022.09.006 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Tackling antineoplastic drugs' contamination in healthcare settings: New insights on surface cleaning approaches.
J Occup Environ Hyg
January 2025
EPIUnit, Instituto de Saúde Pública, Universidade do Porto, Porto, Portugal.
Effective decontamination of hospital surfaces is crucial to protect workers from antineoplastic drugs (ADs) since dermal absorption is the main exposure route to these hazardous medicinal products. Sampling after daily cleaning in oncologic settings from a tertiary hospital was initially performed and exhibited low contamination levels; however, cyclophosphamide was still found (up to 957 pg/cm) above the guidance value (100 pg/cm) in four locations, evidencing the need to properly assess and update the cleaning protocols. Then, cleaning efficiencies of six solutions and different protocols were evaluated (including, for the first time, four commercial cleaning solutions/disinfectants not designed specifically for AD removal) after deliberate contamination of three model surfaces with 13 pharmaceuticals: bicalutamide, capecitabine, cyclophosphamide, cyproterone, doxorubicin, etoposide, flutamide, ifosfamide, imatinib, megestrol, mycophenolate mofetil, paclitaxel, and prednisone.
View Article and Find Full Text PDFPreparation and Adsorption Performance of Walnut Waste-Based Magnetic Activated Carbon with High Specific Surface Area.
ACS Omega
January 2025
Xinjiang Key Laboratory of Novel Functional Materials Chemistry, Kashi University, Kashi, 844000, PR China.
Magnetic activated carbon (MAC) derived from agricultural waste shows significant potential for the removal of norfloxacin (NOR) from wastewater. However, understanding the removal mechanisms, efficiency, and recyclability of MAC produced from walnut green husk and ferrocene for NOR remains a challenge. In this study, walnut green husk-based MAC (HQP-MC) was synthesized, and changes in surface functionality, mechanisms for NOR removal, and major influencing factors were investigated.
View Article and Find Full Text PDFLight-driven in-situ synthesis of nano-sulfur and graphene oxide composites for efficient removal of heavy metal ions.
J Hazard Mater
January 2025
State Key Lab of Geohazard prevention & Geoenvironment protection, College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China. Electronic address:
Sulfur nanoparticles (SNPs) and their composites are promising for heavy metal adsorption, yet current SNPs often lack surface S, leading to low affinity toward heavy metal and ease of aggregation. Here, we report a simple light-driven method for facile prepare SNPs with surfaces enriched with S and in-situ load them onto graphene oxide (GO) to fabricate GO-S composites. Under illumination, the O generated by photosensitizer phloxine B was able to oxidize S into elemental SNPs.
View Article and Find Full Text PDFModifying the antibacterial performance of cu surfaces by topographic patterning in the micro- and nanometer scale.
Biomater Adv
January 2025
Chair of Functional Materials, Department of Materials Science, Saarland University, 66123 Saarbrücken, Germany.
Antimicrobial surfaces are a promising approach to reduce the spread of pathogenic microorganisms in various critical environments. To achieve high antimicrobial functionality, it is essential to consider the material-specific bactericidal mode of action in conjunction with bacterial surface interactions. This study investigates the effect of altered contact conditions on the antimicrobial efficiency of Cu surfaces against Escherichia coli and Staphylococcus aureus.
View Article and Find Full Text PDFSilver Nanoparticles-Functionalized Textile against SARS-CoV-2: Antiviral Activity of the Capping Oleylamine Molecule.
ACS Appl Mater Interfaces
January 2025
Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-909, Brazil.
COVID-19 disease, triggered by SARS-CoV-2 virus infection, has led to more than 7.0 million deaths worldwide, with a significant fraction of recovered infected people reporting postviral symptoms. Smart surfaces functionalized with nanoparticles are a powerful tool to inactivate the virus and prevent the further spreading of the disease.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!