Designing of 3D MnO-graphene catalyst on sponge for abatement temperature removal of formaldehyde.

The Mn-based catalysts, with low cost and high activity, are believed to be the effective composites for eliminating in-door formaldehyde (HCHO), while the powdered form nanosized catalysts are hardly to apply for practical application. Herein, hetero-structure of nanosheets manganese oxide (MnO) encapsulating N-doping graphene sphere (GS) were deposited in network-like sponge for constructing 3D catalyst. The prepared MnO-GS-Sponge composite catalyst exhibited excellent performance for removing HCHO at room temperature compared with GS and commercial MnO. The MnO-GS with larger specific surface area (209.1 m·g) was dispersed evenly in 3D network of sponge, which facilitated exposing more activate sites and achieving fast transport kinetics accelerating catalytic reaction for converting 97.1 % of 100 ppm of HCHO continuously to CO for 120 h. Moreover, rely on the chemisorption of amino groups on N-doping GS surface, HCHO could be enriched even at low concentrations and efficient elimination (from 1000 ppb to12 ppb, at 35 ℃ in 48 h). The average oxidation state and infrared spectra analysis suggested that abundant oxygen vacancies on MnO-GS-Sponge could be identified as surface-active sites of converting HCHO into the intermediates of dioxymethylene and formate. This work might inspire the designing 3D composite material for potential application in other fields of environmental engineering or energy industrial.