Transferosomes are one of the vesicular carriers that have received extensive research and attention recently because of their capacity to get beyond the barriers posed by the stratum corneum to penetration. The intent of the current study is to optimize and evaluate proanthocyanidin (PAC) containing transferosomal transdermal gels. PAC-containing transferosomes were prepared using the film hydration method and then loaded into a 4% methylcellulose gel. A 2 Box-Behnken design was used to optimize the PAC-loaded transferosomal gel, where the effects of phospholipid 90 G (X1), Tween 80 (X2), and sonication time (X3) were evaluated. The formulation factors, such as the drug entrapment efficiency percentage (PEE) and drug release, were characterized. A PEE of 78.29 ± 1.43% and a drug release in vitro at 6 h of 24.2 ± 1.25% were obtained. The optimized transferosomal-loaded proanthocyanidin (OTP) formulation penetrated the porcine skin at an excellent rate (0.123 ± 0.0067 mg/cm/h). Stability tests were conducted for OTP to predict the effects of various temperature conditions on the physical appearance, drug content, and PEE for periods of 15, 30, and 45 days. Finally, this transferosomal system for transdermal PAC delivery may be a suitable alternative to the conventional treatment for osteoarthritis.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9457895 | PMC |
http://dx.doi.org/10.3390/nano12172954 | DOI Listing |
Chempluschem
January 2025
Université de Tours: Universite de Tours, Department of chemistry, 1 JARDIN MONTAIGNE 37300 JOUE LES TOURS, 37300, JOUE LES TOURS, FRANCE.
In this paper, microporous Zn-based zeolitic imidazolate framework with the sodalite cage structure (SOD-ZIF-8) was synthesized by the solvothermal method. Powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and N2 adsorption were employed to characterize the synthesized material. An ultra-sensitive electrochemical sensor based on highly dispersed bimetallic Ni-Pt nanoparticles immobilized on zeolitic metal-organic framework ZIF-8 for dopamine quantification is introduced for the first time.
View Article and Find Full Text PDFSci Rep
January 2025
Egyptian Drug Authority (EDA), Giza, 35521, Egypt.
The present study applied a combined analytical quality-by-design and green analytical chemistry approach to develop an HPLC method for the determination of four cephalosporin pharmaceuticals in both their formulations and water samples. These drugs include ceftriaxone, cefotaxime, ceftazidime and cefoperazone. A Box-Behnken experimental design was employed to optimize three chromatographic parameters: mobile phase composition, flow rate and buffer pH.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Fuel, Minerals and Metallurgical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, 826004, India.
The Malanjkhand chalcopyrite deposit, India's primary copper ore producer, has potential for enhanced flotation performance. This study employs standard flotation experiments using a mechanical cell, integrating a conventional collecting agent with a novel ester-based collector blend. A three-factor, three-level Box-Behnken design systematically evaluated experimental parameters, analysed using ANOVA, cubic plots, response surface methodologies.
View Article and Find Full Text PDFSci Rep
January 2025
Copernicus Institute of Sustainable Development, Utrecht University, Utrecht, The Netherlands.
This study explores the mechanical properties of geopolymer mortars incorporating ceramic and glass powders sourced from industrial waste. A Box-Behnken design was employed to assess the effects of ceramic waste powder (CWP) content, alkaline activator ratio, solution-to-binder (S: B) ratio, and oven curing duration on the mortar's performance. Compressive strengths were measured at 3 and 28 days, and regression models were developed to predict these outcomes.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Mechanical Engineering, Adama Science and Technology University, Adama, Ethiopia.
Recycled engine oil was produced from used engine oil (15W-40) using a combination of MEK and 1-butanol solvents with an activated carbon adsorbent through the adsorption process. The experimental design matrix was prepared using Box-Behnken design (BBD) package within RSM, and recycled engine oil is optimized by response surface methodology (RSM). By varying solvent-to-oil ratio, the temperature and contact duration optimal conditions were identified as a 5.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!