Erbium belongs to rare earth elements critical for industry, especially nuclear technology. Cyanobacteria was used for Er(III) removal from wastewater by applying biosorption and bioaccumulation processes. The influence of pH, Er(III) concentration, contact time and temperature on the biosorption capacity of was determined. The optimal conditions for Er(III) removal were defined as pH 3.0, time 15 min and temperature 20 °C, when 30 mg/g of Er(III) were removed. The kinetics of the process was better described by the pseudo-first-order model, while equilibrium fitted to the Freundlich model. In bioaccumulation experiments, the uptake capacity of biomass and Er(III) effect on biomass biochemical composition were assessed. It was shown that Er(III) in concentrations 10-30 mg/L did not affect the content of biomass, proteins, carbohydrate and photosynthetic pigments. Its toxicity was expressed by the reduction of the lipids content and growth of the level of malonic dialdehyde. Biomass accumulated 45-78% of Eu(III) present in the cultivation medium. Therefore, can be considered as a safe and efficient bioremediator of erbium contaminated environment.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9458052 | PMC |
http://dx.doi.org/10.3390/ma15176101 | DOI Listing |
Environ Res
December 2024
State Key Laboratory of Advanced Metallurgy for Non-ferrous Metals, Changsha, 410083, China; School of Metallurgy and Environment, Central South University, Changsha, 410083, China; Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, China. Electronic address:
The material with high adsorption capacity and selectivity is essential for recovering rare earth elements (REE) from ammonium (NH-N)-rich wastewater. Although the emerging metal-organic framework (MOF) has gained intensive attention in REE recovery, there are scientific difficulties unsolved regarding restricted adsorption capacity and selectivity, hindering its extensive engineering applications. In this work, a diethylenetriamine pentaacetic (DTPA)-modified MOF material (MIL-101(Cr)-NH-DTPA) was prepared through an amidation reaction.
View Article and Find Full Text PDFMaterials (Basel)
September 2022
Department of Nuclear Physics, Joint Institute for Nuclear Research, 141980 Dubna, Russia.
Erbium belongs to rare earth elements critical for industry, especially nuclear technology. Cyanobacteria was used for Er(III) removal from wastewater by applying biosorption and bioaccumulation processes. The influence of pH, Er(III) concentration, contact time and temperature on the biosorption capacity of was determined.
View Article and Find Full Text PDFJ Hazard Mater
February 2022
MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China. Electronic address:
In the application of various magnetic materials for water treatment, control of surface resistance to acid and alkali corrosion remains largely overlooked, which could greatly extend their service life. We herein prepare amino grafted magnetic graphene oxide composites using a simple one-step cross-link reaction between the graphene oxide and magnetic FeO/C nanoparticles. The as-prepared magnetic graphene oxide composites have long-term stability under acid and alkali solutions and shows an excellent performance in removing Ho(III), a representative rare earth element (REE) from water.
View Article and Find Full Text PDFColloids Surf B Biointerfaces
December 2010
Hot Laboratories & Waste Management Center, Egyptian Atomic Energy Authority, P.O. 13759, Cairo, Egypt.
A biomass agricultural waste material, rice husk (RH) was used for preparation of activated carbon by chemical activation using phosphoric acid. The effect of various factors, e.g.
View Article and Find Full Text PDFChemistry
July 2009
Laboratoire de Reconnaissance Ionique et Chimie de Coordination, Service de Chimie Inorganique et Biologique (UMR-E 3 CEA-UJF), CEA/DSM/INAC, CEA-Grenoble, 38054 Grenoble, Cedex 09, France.
Four picolinate building blocks were implemented into the multidentate linker N,N',N'-tetrakis[(6-carboxypyridin-2-yl)methyl]butylenediamine (H(4)tpabn) with a linear flexible spacer to promote the assembly of lanthanide-based 1D coordination polymers. The role of the linker in directing the geometry of the final assembly is evidenced by the different results obtained in the presence of Htpabn(3-) and tpabn(4-) ions. The tpabn(4-) ion leads to the desired 1D polymer {[Nd(tpabn)]H(3)O x 6 H(2)O}(infinity) (12).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!