A considerable proportion of percutaneous nephrolithotomy complications occurs during renal puncture. An option to decrease the complications rate is needle modification to make the procedure less traumatic. We aimed to evaluate the effectiveness of the novel MG needle in a preclinical study. We developed an original MG needle based on the Veress needle concept containing an atraumatic (blunt) mandrin connected through a spring to the cannula. The MG needle's properties were compared with those of the conventional Chiba and Trocar needles in two experiments. In the first experiment, we assessed the force required to puncture the model. In the second experiment, we punctured a porcine kidney and analyzed histology report after the puncture. We performed a series of 30 punctures of polypropylene block by each needle. The force required to make a puncture with the Chiba needle (6.53 ± 0.87 N) was significantly lower compared with the MG needle (7.1 ± 1.07 N),  = 0.027. However, the MG needle turned out to be superior to the Trocar needle (8.71 ± 1.08 N),  = 0.001. A total of 15 specimens were obtained after three renal punctures were made with each needle. A microscopy of the specimen after puncture with the Chiba and Trocar needles showed small fragments of epithelium and erythrocytes inside the canal with uneven margins where the needle passed. A microscopy of the specimen after puncture with a novel MG needle showed a canal with even margins. No tissue fragments inside the canal were observed. The force required to puncture with the novel MG needle is comparable with conventional needles. According to preclinical experiments, histology report of porcine kidney indicates that renal puncture with an MG needle is less traumatic. It may reduce the risk of bleeding, and this should be proved during clinical trials.

Download full-text PDF

Source
http://dx.doi.org/10.1089/end.2022.0371DOI Listing

Publication Analysis

Top Keywords

needle
15
novel needle
12
force required
12
required puncture
12
puncture
9
preclinical study
8
renal puncture
8
chiba trocar
8
trocar needles
8
porcine kidney
8

Similar Publications

Ultrasound-guided Transperineal Prostate Thermal Ablation (TPTA) for Benign Prostatic Hyperplasia: Feasibility of an Outpatient Procedure using Radiofrequency Ablation.

Cardiovasc Intervent Radiol

January 2025

Department of Radiology, Universidade Federal de São Paulo (UNIFESP), Rua Dr. Ovidio Pires de Campos, 75, Cerqueira César, São Paulo, SP, 05403-010, Brazil.

Purpose: To evaluate the feasibility, safety, and short-term (3-month) results of transperineal prostate thermal ablation (TPTA) as a minimally invasive outpatient treatment for benign prostatic hyperplasia (BPH).

Materials And Methods: A prospective nonrandomized study of 25 patients with lower urinary tract symptoms secondary to BPH seeking care at 2 interventional radiology centers between March and July 2024. TPTA was performed using a 17G radiofrequency needle with a 10-mm active tip under unconscious sedation combined with bilateral perineal and periprostatic nerve blocks.

View Article and Find Full Text PDF

Human tumors are diverse in their natural history and response to treatment, which in part results from genetic and transcriptomic heterogeneity. In clinical practice, single-site needle biopsies are used to sample this diversity, but cancer biomarkers may be confounded by spatiogenomic heterogeneity within individual tumors. Here we investigate clonally expressed genes as a solution to the sampling bias problem by analyzing multiregion whole-exome and RNA sequencing data for 450 tumor regions from 184 patients with lung adenocarcinoma in the TRACERx study.

View Article and Find Full Text PDF

Abnormal chromosome segregation (ACS) in preimplantation embryos causes miscarriages. For a normal pregnancy, it is necessary to reduce ACS occurrences in embryos. However, the causes of such abnormalities are unclear because no method to extract the segregated chromosomes from the blastomeres for detailed analysis.

View Article and Find Full Text PDF

Background: Robot-assisted vitreoretinal surgery makes it easier for the surgeons to perform precise and dexterous manipulations required in vitreoretinal procedures.

Methods: We systematically evaluated manual surgery, conventional two-hand teleoperation, a novel one-hand teleoperation, and automation in a needle positioning task using a realistic surgical eye model, measuring the expert surgeon's performances and the novice's learning curves.

Results: The proposed one-hand teleoperation improved the positioning accuracy of expert surgeons , enabled novices to achieve a consistent accuracy more quickly , decreased the novice's workload more quickly , and made it easier for novices to learn to conduct the task quickly .

View Article and Find Full Text PDF

4D-printed programmable sample-/eluent-actuated solid-phase extraction device for trace metal analysis.

Anal Chim Acta

January 2025

Department of Chemistry, National Chung Hsing University, Taichung City, 402202, Taiwan, ROC. Electronic address:

Background: To integrate valves, manifolds, and solid-phase extraction (SPE) columns into a compact device is technically difficult. Four-dimensional printing (4DP) technologies, employing stimuli-responsive materials in three-dimensional printing (3DP), are revolutionizing the fabrication, functionality, and applicability of stimuli-responsive analytical devices that can show time-dependent shape programming to enable more complex geometric designs and functions. However, 4D-printed stimuli-responsive actuators and valves utilized to control flowing streams in SPE applications remain rare.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!