Do composite resin polishing systems damage enamel?

Finishing and polishing of composite resin restorations may cause damage to the bordering enamel. Although many studies have investigated the effect of polish on restorative materials, few have quantified the effect on bordering enamel. The objective of this study was to compare enamel loss surrounding composite restorations after finishing and polishing sequences. The null hypothesis was that there would be no difference in enamel loss between different finishing and polishing sequences. Class V preparations on the buccal and lingual surfaces of 15 extracted human molars were restored with a composite resin and assigned to 1 of 2 finishing and polishing sequences, so that each tooth underwent both sequences (n = 15 per sequence). In sequence 1, a tungsten carbide finishing bur and aluminum oxide polishing discs were used; in sequence 2, a diamond finishing bur, aluminum oxide-impregnated finishing cup, and diamond-impregnated polishing cup were used. Tooth surfaces were scanned with an optical scanner after preparation, finishing, initial polishing, and final polishing. The finishing and polishing scans were aligned to the preparation scan using Cumulus software. The depth of enamel surface loss was calculated and statistically analyzed (α = 0.05; paired t test). Most enamel loss (mean [SD]) resulted from the finishing step with the tungsten carbide bur (51.8 [21.3] μm) or diamond bur (43.3 [12.6] μm). Each polishing step increased mean enamel loss by only a few microns. There was no statistically significant difference between the 2 finishing and polishing sequences. The majority of enamel damage during finishing and polishing of composite resin restorations resulted from the finishing burs. Little enamel was removed by either of the tested composite resin polishing systems.