We measured the concentrations of cesium isotopes (Cs, Cs, and Cs) in zooplankton samples collected in waters off the east coast of Japan from May 2015 to June 2020. By combining these data with those obtained previously from May 2012 to February 2015, we evaluated the long-term impacts of the Fukushima Dai-ichi Nuclear Power Plant accident on marine zooplankton. Relatively high Cs concentrations in zooplankton, exceeding 10 Bq/kg-dry weight, were sporadically observed until June 2016, regardless of year or station. After May-June 2017, Cs concentrations decreased to below 1 Bq/kg-dry at most stations, and by May 2020, concentrations were below 0.5 Bq/kg-dry except those off Fukushima Prefecture. Since the accident, the Cs/Cs atom ratios of zooplankton samples were higher than those of ambient seawater until 2019, but in May-June 2020 the ratios matched those of seawater except off Fukushima Prefecture. Highly radioactive particles were not detected in zooplankton samples by autoradiography using imaging plates after May-June 2017, although they were before. Therefore, the persistence of elevated Cs/Cs ratios in zooplankton relative to seawater for nine years after the accident was probably due to the incorporation of highly radioactive particles (cesium-bearing particles or clay-mineral aggregates with highly adsorbed radiocesium) onto/into zooplankton for several years after the accident. However, since at least May-June 2017, these elevated ratios have likely been caused by small highly radioactive particles (or larger particles disaggregated into small pieces) entering the ocean from land via rivers or directly discharged from the Fukushima Nuclear Power Plant. Microplastics enriched with radiocesium with higher Cs/Cs ratios than seawater may have also contributed Cs to the zooplankton.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.envpol.2022.119962 | DOI Listing |
Sensors (Basel)
January 2025
School of Information Science and Technology, ShanghaiTech University, Shanghai 201210, China.
Accurately measuring the thickness of the oxide film that accumulates on nuclear fuel assemblies is critical for maintaining nuclear power plant safety. Oxide film thickness typically ranges from a few micrometers to several tens of micrometers, necessitating a high-precision measurement system. Eddy current testing (ECT) is commonly employed during poolside inspections due to its simplicity and ease of on-site implementation.
View Article and Find Full Text PDFSensors (Basel)
January 2025
College of Resource Environmental and Safety Engineering, University of South China, Hengyang 421001, China.
To solve the issue of inconvenient and dangerous manual operation during the installation and removal of the main pipe plugging plate in the steam generator in nuclear power plants, a ten-degree-of-freedom plugging robot was designed in the present study that includes a collaborative robotic arm coupled with a servo electric cylinder. By establishing a joint coordinate system for the robot model, a D-H parameter model for the plate plugging robot was established, and the forward and inverse kinematics were solved. The volume level approximate convex decomposition algorithm was used to fit the steam generator model with a convex packet, and an experimental simulation platform was constructed.
View Article and Find Full Text PDFMolecules
January 2025
Department of Chemistry and Biochemistry, State University of New York Brockport, Brockport, NY 14420, USA.
Non-ionic surfactants are an important solvent in the field of green chemistry with tremendous application potential. Understanding their phase properties in bulk or in confined environments is of high commercial value. In recent years, the combination of molecular dynamics (MD) simulations with multinuclear solid-state NMR spectroscopy and calorimetric techniques has evolved into the most powerful tool for their investigation.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
State Key Laboratory of Explosion Science and Protection Technology, Beijing Institute of Technology, Beijing 100081, China.
Hydrogen embrittlement is a critical issue for zirconium alloys, which receives long-term attention in their applications. The formation of brittle hydrides facilitates crack initiation and propagation, thereby significantly reducing the material's ductility. This study investigates the tensile properties and hydride morphology of a novel zirconium alloy under different hydrogen-charging current densities ranging from 0 to 300 mA/cm, aiming to clarify the influence of hydrides on the fracture behavior of the alloy.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Civil and Environmental Engineering, University of Nevada, Reno, NV 89557, USA.
Spent nuclear fuel (SNF) from the United States' nuclear power plants has been placed in dry cask storage systems since the 1980s. Due to the lack of a clear path for permanent geological repository for SNF, consolidated and long-term storage solutions that use durable concrete and avoid current aging and licensing challenges are becoming indispensable. Ultra-high-performance concrete (UHPC) is a rapidly growing advanced concrete solution with superior mechanical and durability properties that can help realize future resilient nuclear storage facilities.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!