A compact four-port multiple-input multiple-output (MIMO) antenna for ultrawideband (UWB) applications is presented in this paper. The proposed antenna has four unit cell antennas. Each unit cell is placed orthogonal to its adjacent elements. The radiation element of each unit cell is composed of a cut semicircular patch and a stepped microstrip feed line. The whole ground on the back side consists of four parts of defective ground and their extended branches, which are connected through a “卍” structure. The main decoupling technology used in the MIMO antenna is polarization diversity. In addition, protruded ground and parasitic elements are added to achieve a higher isolation. This compact antenna has a small area of 45 mm × 45 mm and is printed on a single layer substrate (FR4) with an εr = 4.4 and a thickness of 1.6 mm. This antenna has an impedance bandwidth (S11 < −10 dB) of 3.1−13.1 GHz (123%) and an isolation of less than −17 dB. The envelope correction coefficient (ECC) is less than 0.02 and the average gain is 4 dBi. The ultrawide bandwidth and compact size of the proposed antenna make it a promising candidate for UWB applications.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9370910 | PMC |
| http://dx.doi.org/10.3390/s22155788 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Wideband Eight-Port MIMO Antenna with Reduced Mutual Coupling for Future 5G mm-Wave Applications.
Sensors (Basel)
January 2025
College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
An eight-element MIMO antenna with a neutralization line was utilized for future 5G mm-wave applications. The MIMO configuration was designed for two ports, four ports and eight ports to validate the desired impedance and radiation characteristics. The measured results in terms of MIMO and scattering parameters correlate well with the simulated one.
View Article and Find Full Text PDFRandom Frequency Division Multiplexing.
Entropy (Basel)
December 2024
The School of Electric Engineering and Intelligentization, Dongguan University of Technology, Dongguan 523808, China.
In this paper, we propose a random frequency division multiplexing (RFDM) method for multicarrier modulation in mobile time-varying channels. Inspired by compressed sensing (CS) technology which use a sensing matrix (with far fewer rows than columns) to sample and compress the original sparse signal simultaneously, while there are many reconstruction algorithms that can recover the original high-dimensional signal from a small number of measurements at the receiver. The approach choose the classic sensing matrix of CS-Gaussian random matrix to compress the signal.
View Article and Find Full Text PDFDual-channel near-field holographic MIMO communications based on programmable digital coding metasurface and electromagnetic theory.
Nat Commun
January 2025
Institute of Electromagnetic Space, Southeast University, Nanjing, China.
Holographic multiple-input multiple-output (MIMO) method leverages spatial diversity to enhance the performance of wireless communications and is expected to be a key technology enabling for high-speed data services in the forthcoming sixth generation (6G) networks. However, the antenna array commonly used in the traditional massive MIMO cannot meet the requirements of low cost, low complexity and high spatial resolution simultaneously, especially in higher frequency bands. Hence it is important to achieve a feasible hardware platform to support theoretical study of the holographic MIMO communications.
View Article and Find Full Text PDFCMA-Based design of a Novel structure for isolation enhancement and Radiation Pattern correction in MIMO antennas.
Sci Rep
January 2025
Department of Electronic Engineering, Hanyang University, Seoul, 04763, South Korea.
This paper presents novel MIMO microstrip patch antennas with dimensions of 40 × 80 × 1.6 mm³ incorporating a decoupling and pattern correction structure (DPCS) designed to mitigate mutual coupling and radiation pattern distortion, operating within 3.6-3.
View Article and Find Full Text PDF3D highly isolated 6-port tri-band MIMO antenna system with 360° coverage for 5G IoT applications based machine learning verification.
Sci Rep
January 2025
Electrical Engineering Department, King Saud University, 11421, Riyadh, Saudi Arabia.
A multipurpose antenna system that can handle a broad area of frequencies is crucial in the effort to build up widespread 5G Internet-of-Things (IoT) networks. For fifth-generation Internet-of-things applications, this research introduces a new multi-band antenna that can operate in the sub-6 GHz band (2-7 GHz), Ku-band (13-17.5 GHz), and millimeter wave band (25-39 GHz).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!