The physical crosslinking of polymeric binders through coordination chemistry significantly improves the electrochemical performance of silicon-based negative electrodes. Scanning electron microscopy coupled with energy dispersive X-ray spectroscopy is used to probe the nanoscale morphology of such electrodes. This technique reveals the homogeneous coordination of carboxylated binder with Zn cations and its layering on the silicon surface. The solid electrolyte interphase (SEI) formed after the first cycle is denser with Zn-coordinated binder and preferentially observed on binder-depleted zones. The superiority of coordinated binders can be attributed to their capacity to better stabilize the electrode and the SEI layer due to improved mechanical properties. This results in a lower SEI impedance, a higher first cycle coulombic efficiency, and a 40% improvement of capacity retention after 50 cycles for highly loaded electrodes of over 6 mAh cm .

Download full-text PDF

Source
http://dx.doi.org/10.1002/smtd.202200827DOI Listing

Publication Analysis

Top Keywords

solid electrolyte
8
electrolyte interphase
8
nanoscale morphological
4
morphological characterization
4
characterization coordinated
4
coordinated binder
4
binder solid
4
interphase silicon-based
4
electrodes
4
silicon-based electrodes
4

Similar Publications

Polyhydroxy starch with abundant hydroxyls and a unique structure enables uniform Zn deposition.

Chem Commun (Camb)

January 2025

Laboratory of Advanced Materials, Aqueous Batteries Center, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200433, China.

Zinc metal is a promising anode material for zinc-ion batteries (ZIBs), but severe side reactions and dendrite formation hinder its commercialization. In this study, starch is introduced into the ZnSO electrolyte for stabilizing the Zn anode. With abundant hydroxyl groups, starch can reconstruct the H-bond system in the electrolyte, suppressing side reactions.

View Article and Find Full Text PDF

CuF and LiBOB were co-introduced into polycarbonate-based polymer electrolytes (PVT-CB) to overcome the trade-offs between ionic conduction and interfacial stability, resulting in improved ionic conductivity (8.4 × 10 S cm) and enhanced electrochemical stability (5.04 V Li/Li).

View Article and Find Full Text PDF

Rapid Na Transport Pathway and Stable Interface Design Enabling Ultralong Life Solid-State Sodium Metal Batteries.

Angew Chem Int Ed Engl

December 2024

School of Materials Science and Engineering, State Key Laboratory of Fine Chemicals, Frontiers Science Center for Smart Materials Oriented Chemical Engineering, Technology Innovation Center of High Performance Resin Materials (Liaoning Province), Dalian University of Technology, Dalian, 116024, China.

Sodium-metal batteries (SMBs) using solid-state polymer electrolytes (SPEs) show impressive superiority in energy density and safety. As promising candidates for SPEs, solid-state plastic crystal electrolytes (SPCE) based on succinonitrile (SN) plastic crystal could achieve high ion conductivity and wide voltage window. Nonetheless, the notorious SN decomposition reaction on the electrode/electrolyte interface seriously challenges the stable operation of the battery.

View Article and Find Full Text PDF

Enhancing both ionic conductivity and mechanical robustness remains a major challenge in designing solid-state electrolytes for lithium batteries. This work presents a novel approach in designing mechanically robust and highly conductive solid-state electrolytes, which involves ionic liquid-based cross-linked polymer networks incorporating polymeric ionic liquids (PILs). First, linear PILs with different side groups were synthesized for optimizing the structure.

View Article and Find Full Text PDF

Ti Doping Decreases Mn and Ni Dissolution from High-Voltage LiNiMnO Cathodes.

ACS Mater Au

January 2025

Solid State and Structural Chemistry Unit, IISc, Bengaluru 560012, Karnataka, India.

LiNiMnO (LNMO), with its high operating voltage, is a favorable cathode material for lithium-ion batteries. However, Ni and Mn dissolution and the associated low cycle life limit their widespread adoption. In this work, we investigate titanium doping as a strategy to mitigate Mn and Ni dissolution from LNMO electrodes.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!