In Korea, the number of households with indoor pets is rapidly increasing in parallel with changes in cultural lifestyles. The sensitization rate of pet allergens is also increasing in Korea. We evaluated the effectiveness of washing machines to remove dog and cat hair and their allergens. In addition, this study aimed to investigate whether only a mechanical dryer without mechanical washing could be used for pet allergen removal. We brushed cats and dogs, and thereafter collected their hair and used a residential vacuum cleaner to obtain dust and other particulate matter from a household. The contents of the vacuum bag were sifted through a 300-μm sieve filter. Some of the contents were placed in phosphate-buffered saline solution with 0.5% Tween 20 to make a liquid extract. Hair, dust, and liquid extract-contaminated fabric samples after mechanical washing or after drying without mechanical washing were analyzed for pet allergens (Fel d l [cat], Can f 1 [dog]) by using a two-site enzyme-linked immunosorbent assay. We assessed the remaining allergens in the contaminated fabrics after mechanical drying and washing. The mean Fel d l and mean Can f 1 removal ratios after mechanical washing with detergent were > 99.99% for the dust, hair, and liquid extract. The removal ratios after mechanical washing without a detergent were lower for both Fel d 1 and Can f 1, for hair, dust, and their respective liquid extracts (p < 0.05). Mechanical drying was just as effective as mechanical washing with detergent for removing Can f 1 but was less effective for Fel d 1 (p < 0.05). Mechanical washing with detergent is important to remove pet allergens from contaminated fabrics. If washing is difficult, then using just a dryer without washing can be an alternative method to remove allergens from contaminated bedding or clothing.

Download full-text PDF

Source
http://dx.doi.org/10.2500/aap.2022.43.220029DOI Listing

Publication Analysis

Top Keywords

mechanical washing
32
pet allergens
16
washing detergent
16
washing
12
allergens contaminated
12
mechanical
10
washing drying
8
liquid extract
8
hair dust
8
contaminated fabrics
8

Similar Publications

To prevent water scarcity, wastewater must be discharged to the surface or groundwater after being treated. Another method is to reuse wastewater in some areas after treatment and evaluate it as much as possible. In this study, it is aimed to recover and reuse the caustic (sodium hydroxide, NaOH) used in the recycling of plastic bottles from polyethylene terephthalate (PET) washing wastewater.

View Article and Find Full Text PDF

Analysis of the haemodynamic changes caused by surgical and transcatheter aortic valve replacements by means fluid-structure interaction simulations.

Comput Biol Med

January 2025

UCL Mechanical Engineering, University College London, UK; Ri.MED Foundation, Palermo, Italy; University of Palermo, Department of Engineering, Palermo, Italy. Electronic address:

Aortic valve replacements, both surgical and transcatheter, are nowadays widely employed treatments. Although clinically effective, these procedures are correlated with potentially severe clinical complications which can be associated with the non-physiological haemodynamics that they establish. In this work, the fluid dynamics changes produced by surgical and transcatheter aortic valve replacements are analysed and compared with an ideal healthy native valve configuration, employing advanced fluid-structure interaction (FSI) simulations.

View Article and Find Full Text PDF

Introduction And Objective: Observable autonomous rhythmic changes in intravesical pressure, termed bladder wall micromotion, is a phenomenon that has been linked to urinary urgency, the key symptom in overactive bladder (OAB). However, the mechanism through which micromotion drives urinary urgency is poorly understood. In addition, micromotion is inherently difficult to study in human urodynamics due to challenges distinguishing it from normal cyclic physiologic processes such as pulse rate, breathing, rectal contractions, and ureteral jetting.

View Article and Find Full Text PDF

Synergistic oxidative modification and covalent cross-linking for the construction of sesbania gum-based high efficiency dust suppression foam sols.

Int J Biol Macromol

January 2025

College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, China; State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China.

To effectively utilize sesbania gum in coal dust control and address the limitations of excessive viscosity and mediocre strength, oxidation treatment was used to improve its fluidity. Polyvinyl alcohol (PVA) and sodium trimetaphosphite (STMP) were used to enhance oxidized sesbania gum OSG, and crosslinking technology was used to improve its mechanical stability. This study developed a novel foam dust suppressant OSG-PVA/SDBS by response surface design, and the optimized dust suppressant material exhibited excellent adhesion and curing properties.

View Article and Find Full Text PDF

The durability and flame retardancy of cotton fabrics have been the focus of long-term research. In this paper, a method for preparing flame retardants through the direct modification of biomass was proposed, and the durable flame retardant of homologous cottonseed meal modified biomass flame retardants for cotton fabrics was achieved through biomass composition analysis and modeling. In this study, a cottonseed meal-phosphoric acid-boric acid synergistic bio-based flame retardant (CPB) was synthesized and characterized.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!