Localized waves in elastic plates with perturbed honeycomb arrays of constraints.

Philos Trans A Math Phys Eng Sci

University of Cagliari, Department of Mechanical, Chemical and Materials Engineering, Cagliari 09123, Italy.

Published: September 2022

In this paper, we study wave propagation in elastic plates incorporating honeycomb arrays of rigid pins. In particular, we demonstrate that topologically non-trivial band-gaps are obtained by perturbing the honeycomb arrays of pins such that the ratio between the lattice spacing and the distance of pins is less than 3; conversely, a larger ratio would lead to the appearance of trivial stop-bands. For this purpose, we investigate band inversion of modes and calculate the valley Chern numbers associated with the dispersion surfaces near the band opening, since the present problem has analogies with the quantum valley Hall effect. In addition, we determine localized eigenmodes in strips, repeating periodically in one direction, that are subdivided into a topological and a trivial section. Finally, the outcomes of the dispersion analysis are corroborated by numerical simulations, where a time-harmonic point source is applied to a plate with finite arrays of rigid pins to create localized waves immune to backscattering. This article is part of the theme issue 'Wave generation and transmission in multi-scale complex media and structured metamaterials (part 1)'.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9289525PMC
http://dx.doi.org/10.1098/rsta.2021.0404DOI Listing

Publication Analysis

Top Keywords

honeycomb arrays
12
localized waves
8
elastic plates
8
arrays rigid
8
rigid pins
8
waves elastic
4
plates perturbed
4
perturbed honeycomb
4
arrays
4
arrays constraints
4

Similar Publications

This paper presents a novel foldable S-band microstrip patch antenna array operating in the 2.4-2.45 GHz band.

View Article and Find Full Text PDF

Bamboo-Based Carbon/Co/CoO Heterojunction Structures Based on a Multi-Layer Periodic Matrix Array Can Be Used for Efficient Electromagnetic Attenuation.

Materials (Basel)

October 2024

Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China.

Article Synopsis
  • The increasing prevalence of wireless communication and electronic devices poses significant risks from electromagnetic radiation, prompting the need for protective materials.
  • Researchers developed a green biomass carbon-based composite from bamboo, specifically designed to absorb electromagnetic waves by creating a specialized heterojunction interface that enhances polarization and energy loss.
  • The resulting material demonstrates impressive absorption capabilities, with effective bandwidth of 5.1 GHz and a reflection loss of -54.7 dB, as well as significant radar cross-section reduction, indicating its potential for various applications.
View Article and Find Full Text PDF

Honeycomb-Shaped Phononic Crystals on 42°Y-X LiTaO/SiO/Poly-Si/Si Substrate for Improved Performance and Miniaturization.

Micromachines (Basel)

October 2024

School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, No. 2006, Xiyuan Avenu, West Hi-Tech Zone, Chengdu 611731, China.

A SAW device with a multi-layered piezoelectric substrate has excellent performance due to its high Q value. A multi-layer piezoelectric substrate combined with phononic crystal structures capable of acoustic wave reflection with a very small array can achieve miniaturization and high performance. In this paper, a honeycomb-shaped phononic crystal structure based on 42°Y-X LT/SiO/poly-Si/Si-layered substrate is proposed.

View Article and Find Full Text PDF

Programmed Internal Reconfigurations in a 3D-Printed Mechanical Metamaterial Enable Fluidic Control for a Vertically Stacked Valve Array.

Adv Funct Mater

August 2024

Department of Nanoscience, Joint School of Nanoscience and Nanoengineering, University of North Carolina at Greensboro, Greensboro, NC, USA 27401; Department of Biology, College of Arts and Sciences, University of North Carolina at Greensboro, Greensboro, NC, USA 27412.

Microfluidic valves play a key role within microfluidic systems by regulating fluid flow through distinct microchannels, enabling many advanced applications in medical diagnostics, lab-on-chips, and laboratory automation. While microfluidic systems are often limited to planar structures, 3D printing enables new capabilities to generate complex designs for fluidic circuits with higher densities and integrated components. However, the control of fluids within 3D structures presents several difficulties, making it challenging to scale effectively and many fluidic devices are still often restricted to quasi-planar structures.

View Article and Find Full Text PDF

In Situ Crystal Growth and Fusing-Confined Engineering of Quasi-Monocrystalline Perovskite Thick Junctions for X-ray Detection and Imaging.

ACS Nano

October 2024

School of Integrated Circuits and Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China.

Metal halide perovskites exhibit great promise for utilization in X-ray detection owing to their excellent optoelectronic properties and high X-ray attenuation capabilities. However, fabricating large-area thick films for high-performance perovskite X-ray detection remains challenging. This study develops an in situ crystal growth and fusing-confined approach to prepare high-quality, large-scale perovskite quasi-monocrystalline thick junctions.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!