Ceramic membrane has become a major concern due to creasing cost and competitive efficiency. Microbial fuel cell-ceramic membrane bioreactor (MFC-CMBR) is considered alternative technology for larger-scale industrial application because of its advantages of convenient detecting and control of membrane fouling. However, MFC-CMBR are highly susceptible to membrane fouling and harsh operating requirements in these wastewaters of different compositions. This research critically discusses that electrochemical response in different types of MFC-CMBRs and control of electricity utilization on ceramic membrane fouling. The experimental results indicated that the application of sludge acclimated in coupling system with higher external resistance could ensure that lower costs (electricity utilization and membrane cleaning) provided enough membrane fouling control. The improved performance of MFC-CMBR-1 could be attributed to its enhanced nitrification/denitrification activity and capacity of electrons migration between electrode and sludge mixture. The coupling system alleviated membrane fouling and impedance increasing by improving the characteristics of sludge (increased particle size, decreased adsorption adhesion free energy), EPS (decreased hydrophobicity, molecular weight distribution regulation). And filtration tests showed that roughness and contact angle for the MFC-CMBR tend for better development compared to CMBR, dependent on the changes in the chemical surface groups as a result of electric distribution ratio. In addition, correlation analysis and filtration experiments showed that the extracellular polymer substances (EPS) enhanced the charge transfer resistance (R), and the protein substance in EPS was the main fouling substance when external resistance was close to the internal resistance of MFC. In summary, the low internal resistance of ceramic membrane lead to obvious better fouling control and electricity utilization than organic membrane, and the paper provides insight into the MFC-CMBR systems for a wide range of detecting membrane fouling and applications of membrane fouling mitigation.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.watres.2022.118854 | DOI Listing |
J Environ Manage
January 2025
College of Environmental Science and Engineering, Zhejiang Gongshang University, Hangzhou, China; International Science and Technology Cooperation Platform for Low-Carbon Recycling of Waste and Green Development, Zhejiang Gongshang University, Hangzhou, China. Electronic address:
The treatment of landfill leachate using anaerobic membrane bioreactors (AnMBRs) often faces challenges such as poor removal efficiency, low methane yield and membrane fouling. This study applied AnMBRs with incrementally adding conductive materials to enhance the treatment of landfill leachate under high organic loading rates(35 kg COD/(m∙d)). With 50 g/L activated carbon, COD removal percentages and methane yield increased to 81.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Qatar Foundation, Doha P.O. Box 34110, Qatar.
The development of ultrafiltration (UF) polymeric membranes with high flux and enhanced antifouling properties bridges a critical gap in the polymeric membrane fabrication research field. In the present work, the preparation of novel PES membranes incorporated with carrageenan (CAR), which is a natural polymer derived from edible red seaweed, is reported for the first time. The PES/CAR membranes were prepared by using the nonsolvent-induced phase separation (NIPS) method at 0.
View Article and Find Full Text PDFMembranes (Basel)
January 2025
Department of Environmental Science and Engineering, Ewha Womans University, Seoul 03760, Republic of Korea.
The rapid expansion of the cosmetics industry has significantly increased the adoption of alternative microplastics in response to increasingly stringent global environmental regulations. This study presents a comparative analysis of the treatment performance of silica powder and cornstarch-common alternatives for microplastics in cosmetics-using ceramic membrane filtration combined with flow imaging microscopy (FlowCam) to analyze particle behavior. Bench-scale crossflow filtration experiments were performed with commercially available alumina ceramic membranes.
View Article and Find Full Text PDFMembranes (Basel)
January 2025
Ralph E. Martin Department of Chemical Engineering, University of Arkansas, Fayetteville, AR 72701, USA.
Virus filtration is used to ensure the high level of virus clearance required in the manufacture of biopharmaceutical products such as monoclonal antibodies. Flux decline during virus filtration can occur due to the formation of reversible aggregates consisting of self-assembled monomeric monoclonal antibody molecules, particularly at high antibody concentrations. While size exclusion chromatography is generally unable to detect these reversible aggregates, dynamic light scattering may be used to determine their presence.
View Article and Find Full Text PDFMembranes (Basel)
January 2025
DVGW-Research Center at the Engler-Bunte-Institute, Water Chemistry and Water Technology, Karlsruhe Institute of Technology, Engler-Bunte-Ring 9, 76131 Karlsruhe, Germany.
Short-chain fatty acids (SCFAs) are valuable metabolic intermediates that are produced during dark fermentation of sludge, which, when capitalized on, can be used as chemical precursors for biotechnological applications. However, high concentrations of solids with SCFAs in hydrolyzed sludge can be highly detrimental to downstream recovery processes. This pilot-scale study addresses this limitation and explores the recovery of SCFAs from primary sludge into a particle-free permeate through a combination of chamber filter-press (material: polyester; mesh size: 100 µm) and cross-flow microfiltration (material: α-AlO; pore size: 0.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!