In battery-recycling facilities, exposure to trace elements may occur through inhalation of contaminated dust or vapor emanating from the treatment processes. Exposure of battery-recycling workers to lead has been quite well covered in the literature. In contrast, we lack data on exposure to other elements contained in batteries. The aim of this study was to characterize the exposure of French battery recyclers to multiple elements using biomonitoring and airborne measurements. Eighty-six workers participated in the study. Inhalable metal concentrations were determined for personal airborne samples, and total exposure was determined from pre-shift and post-shift urine samples collected during the working week. In both types of sample, a total of 33 trace elements were measured using inductively coupled plasma mass spectrometry. Results showed battery recyclers to be mostly exposed to Cd, Co, Cr, Li, Mn, Ni, and Pb. Administrative and sorting workers were exposed at lower levels than maintenance, treatment, and dismantling workers. Cd, Co, Li, Mn, and Ni were detected at high levels in air samples, especially near the treatment facilities, with airborne cadmium levels of up to 79.4 µg/m. Urinary sample analysis indicated exposure to Cd and Co, with levels measured at up to 27.6 and 3.34 µg/g of creatinine, respectively. Concentrations were compared to data reported for e-waste recycling companies. The data presented provide valuable information on exposure to trace elements for workers involved in battery-recycling. They also highlight the need to improve both collective and individual protective measures, which were not sufficient in the participating companies.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.wasman.2022.06.044 | DOI Listing |
Adv Mater
January 2025
Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China.
Among direct recycling methods for spent lithium-ion batteries, solid-state regeneration is the route with minimal bottlenecks for industrial application and is highly compatible with the current industrial cathode materials production processes. However, surface structure degradation and interfacial impurities of spent cathodes significantly hinder Li replenishment during restoration. Herein, we propose a unique advanced oxidation strategy that leverages the inherent catalytic activity of spent layered cathode materials to address these challenges.
View Article and Find Full Text PDFSci Total Environ
January 2025
School of Environmental Science and Engineering, Shanghai Jiao Tong University, 200240, China.
The recycling of spent lithium-ion batteries has become a common concern of the whole society, with a large number of studies on recycling management and recycling technology, but there is relatively little study on the pollution release during the recycling process. Pollution will restrict the healthy development of the recycling industry, which makes relevant research very significant. This paper monitored and analyzed the battery recycling pretreatment process in a formal factory, and studied the pollution characteristics of particulate matter, heavy metals, and microplastics under different treatment stages.
View Article and Find Full Text PDFWaste Manag
January 2025
VTT Technical Research Centre of Finland Ltd, P.O. Box 1000, FI-02044 VTT, Finland.
Battery technology has attained a key position as an energy storage technology in decarbonization of energy systems. Lithium-ion batteries have become the dominant technology currently used in consumer appliances, electric vehicles (EVs), and industrial applications. However, lithium-ion batteries are not alike and can have different cathode chemistries which makes their recycling more complex.
View Article and Find Full Text PDFLangmuir
January 2025
BMI Center for Biomass Materials and Nanointerfaces, National Engineering Laboratory for Clean Technology of Leather Manufacture, Ministry of Education Key Laboratory of Leather Chemistry and Engineering, College of Biomass Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, China.
The growing demand for energy storage batteries, driven by the need to alleviate global warming and reduce fossil fuel dependency, has led to environmental concerns surrounding spent batteries. Efficient recycling of these batteries is essential to prevent pollution and recover valuable metal ions such as nickel (Ni), cobalt (Co), and manganese (Mn). Conventional hydrometallurgical methods for battery recycling, while effective, often involve harmful chemicals and processes.
View Article and Find Full Text PDFSmall
January 2025
Department of Mechanical Engineering, University of Delaware, Newark, DE, 19716, USA.
Failure of the active particles is inherently electrochemo-mechanics dominated. This review comprehensively examines the electrochemo-mechanical degradation and failure mechanisms of active particles in high-energy density lithium-ion batteries. The study delves into the growth of passivating layers, such as the solid electrolyte interphase (SEI), and their impact on battery performance.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!