An epoxy-based shape memory polymer (SMP) is synthesized and examined for its deterioration in shape fixity due to springback and isothermal viscoelastic recovery at different ambient temperatures. Shape fixity depends not only on material properties but also on programming conditions. A constitutive finite deformation model is incorporated to predict the behavior of the proposed SMP and find maximum shape fixity. A programming approach is followed in which, in contrast to hot programming, the SMPs are neither heated before deformation nor cooled afterward but are deformed at ambient temperature and then stress-relaxed. The proximity of the programming temperature to the glass transition temperature plays a crucial role in determining the shape fixity of SMP. It has been found that the SMP with a glass transition temperature of 42.9 °C can achieve maximum shape fixity of 92.25% when programmed at 23 °C with 100 min stress relaxation time. Thermal contraction and dynamic tests are performed in the Dynamic Mechanical Analyzer (DMA) to determine structural relaxation properties and distinguish the programming temperature in the cold, warm or hot temperature zone. The shape memory tests are carried out using temperature-controlled UTM to determine the shape fixity and shape recovery of SMP. The SMPs are subjected to a full thermomechanical cycle with different stress relaxation times and programming temperatures.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9268782PMC
http://dx.doi.org/10.3390/polym14132753DOI Listing

Publication Analysis

Top Keywords

shape fixity
24
shape memory
12
glass transition
12
transition temperature
12
shape
10
maximum shape
8
programming temperature
8
stress relaxation
8
temperature
7
fixity
6

Similar Publications

In recent years, the development of biodegradable, cell-adhesive polymeric implants and minimally invasive surgery has significantly advanced healthcare. These materials exhibit multifunctional properties like self-healing, shape-memory, and cell adhesion, which can be achieved through novel chemical approaches. Engineering of such materials and their scalability using a classical polymer network without complex chemical synthesis and modification has been a great challenge, which potentially can be resolved using biobased dynamic covalent chemistry (DCC).

View Article and Find Full Text PDF

In this research, blends of bio-based polybenzoxazine (V-fa) and polycaprolactone (PCL) with different molecular weights (M) (14,000, 45,000, and 80,000 Da) were prepared with varying PCL content from 10 to 95 wt%. The spectra measured using Fourier Transform Infrared Spectroscopy (FTIR) may indicate the presence of hydrogen bonding between two polymeric components. The thermograms obtained using a Differential Scanning Calorimeter (DSC) and dynamic mechanical analyzer (DMA) exhibited a shift in glass transition temperature (T), which indicated partial miscibility between V-fa and PCL.

View Article and Find Full Text PDF

The climate and ecological crisis poses an unprecedented challenge, with scientists playing a critical role in how society understands and responds. This study examined how 27 environmentally concerned scientists from 11 countries construct the future in the context of climate change, applying a critical discursive psychology analysis. The degree to which the future is constructed as predetermined or transformable impacts both the urgency and scope of proposed actions.

View Article and Find Full Text PDF

"Inverse" shape memory effect in energetic electron crosslinked methylcellulose hydrogels: Programming, demonstration and quantification.

Int J Biol Macromol

January 2025

Division of Surface Physics, Department of Physics and Earth System Sciences, University of Leipzig, Linnéstr. 5, 04103 Leipzig, Germany; Leibniz Institute of Surface Engineering (IOM), Permoserstr. 15, 04318 Leipzig, Germany. Electronic address:

Shape memory hydrogels constitute a highly attractive materials class that bears enormous potential within a broad range of areas - from engineering to medicine. Within the present contribution we demonstrate that energetic electron crosslinked methylcellulose-only hydrogels exhibit an "inverse" shape memory effect that transforms from a secondary shape to its primary shape upon cooling. The primary shape can conveniently be "programmed" by application of energetic electrons.

View Article and Find Full Text PDF

3D-Printed Shape Memory and Piezoelectric Bifunctional Thermoplastic Polyurethane/Polyvinylidene Fluoride Porous Composite Scaffold for Bone Regeneration.

ACS Biomater Sci Eng

November 2024

Key Laboratory of Hunan Province for Efficient Power System and Intelligent Manufacturing, College of Mechanical and Energy Engineering, Shaoyang University, Shaoyang 422000, China.

Article Synopsis
  • Physical stimulation methods, like mechanical and electric stimulation, are gaining attention in bone repair research for their ability to enhance cell activity at bone defect sites.
  • Researchers developed bifunctional porous composite scaffolds using thermoplastic polyurethane (TPU) and poly(vinylidene fluoride), demonstrating impressive shape memory (98.6% shape fixity) and piezoelectric properties similar to bone tissue.
  • The composite scaffolds exhibited significantly increased strength (8.3 times that of TPU scaffolds) and excellent cytocompatibility, making them promising for continuous mechanical and electric stimulation in bone repair applications.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!