Three-dimensional printing offers possibilities for the development of new models in endodontics. Numerous studies have used 3D-printed teeth; however, protocols for the standardization of studies still need to be developed. Another problem with 3D-printed teeth is the different areas of literature requested to understand the processes. This review aims to gather evidence about 3D-printed teeth on the following aspects: (1) why they are advantageous; (2) how they are manufactured; (3) problems they present; and (4) future research topics. Natural teeth are still the standard practice in ex vivo studies and pre-clinical courses, but they have several drawbacks. Printed teeth may overcome all limitations of natural teeth. Printing technology relies on 3D data and post-processing tools to form a 3D model, ultimately generating a prototype using 3D printers. The major concerns with 3D-printed teeth are the resin hardness and printing accuracy of the canal anatomy. Guidance is presented for future studies to solve the problems of 3D-printed teeth and develop well-established protocols, for the standardization of methods to be achieved. In the future, 3D-printed teeth have the possibility to become the gold standard in ex vivo studies and endodontic training.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9265401 | PMC |
| http://dx.doi.org/10.3390/ijerph19137966 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
3D Printed Endocrowns versus Prefabricated Zirconia Crowns for Pulpotomized Primary Molars: A Randomized Controlled Trial.
J Dent
January 2025
The department of pediatric dentistry and dental public health, faculty of dentistry, Ain Shams university. Organization of African Unity St. Abbasia - Cairo, Egypt, Post No. 11566. Electronic address:
Objectives: This study aims to compare the clinical performance of 3D printed endocrowns (ECs) and prefabricated zirconia crowns (PZRCs) in restoring pulpotomized primary molars, over 3, 6, and 12 months.
Methods: Thirty pulpotomized mandibular primary molars in 16 children aged 4-8 years were randomized with a 1:1 allocation ratio into two groups: group (A), PZRCs, and group (B), 3D-printed ECs. All restorations were evaluated for esthetic, functional, and biological properties using FDI criteria at 3-, 6-, and 12-month intervals.
Masking Ability of Subtractively and Additively Manufactured Dental Ceramic Restorations: A Systematic Review.
J Esthet Restor Dent
January 2025
Sir John Walsh Research Institute, Faculty of Dentistry, University of Otago, Dunedin, New Zealand.
Objective: To conduct a systematic review on the masking ability of subtractively and additively manufactured dental ceramics.
Materials And Methods: The study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The electronic search was carried out through MEDLINE, Scopus, and Website of Science databases with a date restriction being from 2001 onwards.
Interdisciplinary, Computer-Guided Periodontal and Dental Management of a Novel Hypo- and Microdontia Case Restored With Ultrathin Veneers Fabricated via INKGLUE Technique.
J Esthet Restor Dent
January 2025
APA Advanced Clinical Fellowship Program in Aesthetic Dentistry, New York University College of Dentistry, New York City, New York, USA.
Objectives: This report illustrates the digital interdisciplinary management of a case presenting with diastemata, a retained primary tooth, microdontia, and hypodontia. Esthetic crown lengthening and ultrathin veneers optimized the natural dentition and achieved a stable, minimally-invasive, and esthetically-pleasing outcome.
Clinical Considerations: Reduction guides were digitally-designed and 3D-printed for guided crown lengthening and dental veneer preparation.
Influence of 3D printing orientations on physico-mechanical properties and accuracy of additively manufactured dental ceramics.
J Prosthodont Res
January 2025
Substitutive Dental Science Department, College of Dentistry, Taibah University, Al-Madinah, Saudi Arabia.
Purpose: This systematic review aims to assess the impact of different 3D printing orientations on the physico-mechanical properties, volumetric change, and accuracy of additively manufactured ceramic specimens, as well as their restorations.
Study Selection: The web database containing records for building orientation of 3D-printed ceramics until January 2024 was searched, with no language limitations. PRISMA 2020 guidelines were followed, and the risk of bias was evaluated using the modified CONSORT checklist for laboratory studies on dental materials.
Comparison of marginal fit between milled and three-dimensional printed polymethylmethacrylate prostheses for single crowns, anterior bridges, and pier abutment bridges: An in vitro study.
J Indian Prosthodont Soc
January 2025
Department of Prosthodontics and Implantology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamil Nadu, India.
Aim: The purpose of this in vitro study was to compare the marginal fit of various three-dimensional (3D) printed and milled polymethylmethacrylate (PMMA) dental prostheses.
Settings And Design: The study was conducted in an in vitro study setting.
Materials And Methods: With a sample size of 45 for each fabrication method, this investigation compared the marginal fit of milled (Group 1) and 3D printed (Group 2) PMMA dental prostheses across different designs.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!