AI Article Synopsis

  • The study emphasizes the necessity of eliminating pharmaceutical contaminants from water due to environmental and health risks, highlighting the efficacy of advanced oxidation processes (AOPs) in wastewater treatment.
  • Researchers synthesized graphene hydrogel-metal nanocomposites (GH-M) using polyol and hydrothermal methods, characterizing them with various techniques and employing them as cathodes in the electro-Fenton process to target the removal of rifampicin (RIF) from polluted water.
  • The optimal conditions for maximum RIF removal were determined, achieving effectiveness rates of up to 93.69% with the GH-Ni cathode under specific current density, pH, concentration, and time parameters, demonstrating the potential of these nanocomposites in wastewater treatment applications.

Article Abstract

Nowadays, the removal of pharmaceutical contaminants from water resources and wastewater is of great importance due to environmental and health issues. Over the decades, various methods have been reported to remove pollutants from wastewater. Among the developed methods, advanced oxidation processes (AOPs) have received significant attention from researchers. In this study, we report the one-pot synthesis of graphene hydrogel-metal (GH-M, M: Co, Ni, Cu) nanocomposites via the combination of polyol and hydrothermal methods. The structure of the resulting nanocomposites was examined by transmission electron microscopy (TEM), inductively coupled plasma-mass spectroscopy (ICP-MS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and Raman spectroscopy methods. Afterward, as-prepared GH-Cu, GH-Co, and GH-Ni nanocomposites were used to prepare cathodes for the electro-Fenton (EF) process to remove rifampicin (RIF) from polluted water. The effect of operational parameters, including current density (mA/cm), initial pH, initial RIF concentration (mg/L), and process time (min) was investigated via response surface methodology (RSM). The optimal values for current density, pH, initial RIF concentration, and process time using GH-Ni as cathode were 30 mA/cm, 5, 30 mg/L, and 90 min, respectively. The results at optimal values showed that the maximum RIF removal efficiency for GH-Cu, GH-Co, and GH-Ni cathodes was 90.47, 92.60, and 93.69%, respectively. Brunauer Emmett Teller (BET), atomic force microscopy (AFM), energy-dispersive X-ray (EDX), and cyclic voltammetry (CV) analyses were performed to investigate the performance of the cathodes for the RIF removal. Finally, total organic carbon (TOC), gas chromatography-mass spectrometry (GC-MS), and atomic absorption spectroscopy (AAS) analyses were performed for further investigation of the RIF removal from polluted water. The results claimed that one-pot synthesized GH-M cathodes can effectively remove RIF from polluted water through EF process.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.envres.2022.113789DOI Listing

Publication Analysis

Top Keywords

polluted water
16
rif removal
12
one-pot synthesis
8
synthesis graphene
8
gh-cu gh-co
8
gh-co gh-ni
8
rif polluted
8
current density
8
initial rif
8
rif concentration
8

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!