High Gas Sensitivity to Nitrogen Dioxide of Nanocomposite ZnO-SnO Films Activated by a Surface Electric Field.

Gas sensors based on the multi-sensor platform MSP 632, with thin nanocomposite films based on tin dioxide with a low content of zinc oxide (0.5-5 mol.%), were synthesized using a solid-phase low-temperature pyrolysis technique. The resulting gas-sensitive ZnO-SnO films were comprehensively studied by atomic force microscopy, Kelvin probe force microscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, scanning transmission electron microscopy, energy dispersive X-ray spectrometry, and X-ray photoelectron spectroscopy. The obtained films are up to 200 nm thick and consist of ZnO-SnO nanocomposites, with ZnO and SnO crystallite sizes of 4-30 nm. Measurements of ZnO-SnO films containing 0.5 mol.% ZnO showed the existence of large values of surface potential, up to 1800 mV, leading to the formation of a strong surface electric field with a strength of up to 2 × 10 V/cm. The presence of a strong surface electric field leads to the best gas-sensitive properties: the sensor's responsivity is between two and nine times higher than that of sensors based on ZnO-SnO films of other compositions. A study of characteristics sensitive to NO (0.1-50 ppm) showed that gas sensors based on the ZnO-SnO film demonstrated a high sensitivity to NO with a concentration of 0.1 ppm at an operating temperature of 200 °C.