In this investigation, a phononic crystal-based fiber is proposed for energy harvesting application in metalworking factories. Phononic crystal plays the role of cladding in elastic fiber structure. Each of single-core fibers includes a tungsten hollow cylinder in central region which its internal radius is different in three single-core fibers. Incident waves with central frequency from 25 to 40 kHz of 1/3 octave band are confined in the core region of proposed elastic fibers and transmitted to desired distance. High confinement and transmission ability without significant longitudinal loss make this structure distinct from the other phononic crystals-based energy harvesters. By utilizing of a piezoelectric film at the end of fiber cores, mechanical energy is converted to electrical energy. As proposed elastic fibers confine the applied waves with high quality, the obtained output power is enhanced up to 800 times in comparison with the bare case. Maximum value of extinction ratio between all single core fibers is equal to - 23 dB. Also, longitudinal loss is almost equal to 0.9 dB/km.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9217818 | PMC |
| http://dx.doi.org/10.1038/s41598-022-14134-9 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Environmental contaminants assessment for frequently harvested migratory waterfowl in the Northeast Atlantic flyway.
Sci Total Environ
January 2025
Wildlife Health Lab, Animal Health Diagnostic Center, College of Veterinary Medicine, Cornell University, 240 Farrier Rd, Ithaca, NY 14853, USA. Electronic address:
Waterfowl serve as indicators of ecosystem health and represent a pathway of contaminant exposure for hunters who consume them. In the northeast Atlantic Flyway, data on baseline contaminant loads in waterfowl are lacking. We assessed five species of commonly harvested (and consumed) waterfowl for mercury, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans, polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), and per- and polyfluoroalkyl substances (PFAS).
View Article and Find Full Text PDFCombination of Broad Light-Absorption CuS with S,C,N-TiO: Assessment of Photocatalytic Performance in Nitrogen Fixation Reaction.
Inorg Chem
January 2025
Research Laboratory of Advanced Water and Wastewater Treatment Processes, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz 51666-16471, Iran.
In the field of solar energy storage, photocatalytic ammonia production is a next-generation technology. The rapid recombination of charges and insignificant utilization of the sunlight spectrum are bottlenecks of effective photocatalytic N fixation. The introduction of impurities in the crystal lattice and the development of heterojunctions could effectively segregate carriers and improve the solar-light-harvesting capability, which can boost NH generation.
View Article and Find Full Text PDFCompressing slippery surface-assembled amphiphiles for tunable haptic energy harvesters.
Sci Adv
January 2025
Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, USA.
A recurring challenge in extracting energy from ambient motion is that devices must maintain high harvesting efficiency and a positive user experience when the interface is undergoing dynamic compression. We show that small amphiphiles can be used to tune friction, haptics, and triboelectric properties by assembling into specific conformations on the surfaces of materials. Molecules that form multiple slip planes under pressure, especially through π-π stacking, produce 80 to 90% lower friction than those that form disordered mesostructures.
View Article and Find Full Text PDFFully biodegradable hierarchically designed high-performance nanocellulose piezo-arrays.
Sci Adv
January 2025
NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, I-56127 Pisa, Italy.
While piezoelectric sensing and energy-harvesting devices still largely rely on inorganic components, biocompatible and biodegradable piezoelectric materials, such as cellulose nanocrystals, might constitute optimal and sustainable building blocks for a variety of applications in electronics and transient implants. To this aim, however, effective methods are needed to position cellulose nanocrystals in large and high-performance architectures. Here, we report on scalable assemblies of cellulose nanocrystals in multilayered piezoelectric systems with exceptional response, for various application scopes.
View Article and Find Full Text PDFPerspective on Flexible Organic Solar Cells for Self-Powered Wearable Applications.
ACS Appl Mater Interfaces
January 2025
Laboratory of Advanced Optoelectronic Materials, Suzhou Key Laboratory of Novel Semiconductor-Optoelectronics Materials and Devices, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China.
The growing advancement of wearable technologies and sophisticated sensors has driven the need for environmentally friendly and reliable energy sources with robust mechanical stability. Flexible organic solar cells (OSCs) have become promising substitutes for traditional energy solutions thanks to their remarkable mechanical flexibility and high power conversion efficiency (PCE). These unique properties allow flexible OSCs to seamlessly integrate with diverse devices and substrates, making them an excellent choice for powering various electronic devices by efficiently harvesting solar energy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!