Due to the growing human tendency to treat with natural substances, fungi such as Ganoderma lucidum can be a good source to meet this need. Effectiveness, ease of use and a rich source of active ingredients such as ganoderic acids have caused G. lucidum to be considered in the pharmaceutical and food industries. In this project, G. lucidum was applied to extraction using supercritical carbon dioxide. Then expansion of supercritical fluid solution (ESS) was used as, novel, repeatable and green method to yield nanoparticles from G.lucidum extract. The response surface method was used to improve the Extraction efficiency, antioxidant activity, and improving the nanoparticles production status. Optimal conditions were observed at the extraction step by setting pressure at 27.5 MPa, dynamic time of 46 min, and modifier volume of 162 μL. The optimum point for the production of nanoparticles was obtained as follows: pressure drop at 25 MPa, 20 min for collection time, and 40° C for temperature. Under these conditions, the size and count were 86.13 nm, and 98, respectively. Nanoparticles were analyzed by FESM and, the DPPH was used for antioxidant activity evaluation. The LC-MS identified various ganoderic acids from G.lucidum that are famous to be highly oxygenated triterpenoids.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9198024PMC
http://dx.doi.org/10.1038/s41598-022-13727-8DOI Listing

Publication Analysis

Top Keywords

expansion supercritical
8
supercritical fluid
8
fluid solution
8
ganoderic acids
8
antioxidant activity
8
nanoparticles
5
production ganoderma
4
ganoderma lucidum
4
lucidum extract
4
extract nanoparticles
4

Similar Publications

Preparation of two-dimensional (2D) ferromagnetic nanomaterials and the study of their magnetic sources are crucial for the exploration of new materials with multiple applications. Herein, two-dimensional room-temperature ferromagnetic (FM) CaTiO nanosheets are successfully constructed with the assistance of supercritical carbon dioxide (SC CO). In this process, the SC CO-induced strain effect can lead to lattice expansion and introduction of O vacancies.

View Article and Find Full Text PDF

Research Background: Fish by-products are discarded as waste, which has a significant impact on the environment. They have no economic value, but there are many opportunities to turn them into high value products. Due to significant quantities generated internationally and the continuous expansion of the market for ω-3 and ω-6 fatty acids as nutraceuticals, innovative technological approaches are needed to transform this waste into marketable products with added value, while limiting the risk of environmental pollution.

View Article and Find Full Text PDF

The temperature of the water wall in the furnace chamber is extremely important for the daily operation of a boiler. Considering the high temperature and dusty environment in the furnace, a temperature measurement device mainly composed of four parts (armored temperature sensor, in-furnace heat-collecting block, out-furnace fixing base, and protective cannula) was designed in this study, which could be used to directly obtain the temperature of the in-furnace water-wall. Numerical simulations of temperature measurement devices with different heat-collecting block structures were carried out using the computer fluid dynamics method.

View Article and Find Full Text PDF

An ever-increasing number of applications of oxide aerogels places a high demand on wettability-tuning techniques. This work explores the possibility to cheaply prepare GeO aerogels with controlled wettability by an ambient pressure drying (APD) method. GeO aerogels are prepared via two synthetic routes.

View Article and Find Full Text PDF

Understanding mono- and bi-metallic Au and Ni nanoparticle responses to fast heating.

Nanoscale Adv

September 2024

Université Jean Monnet Saint-Etienne, CNRS, Institut d Optique Graduate School, Laboratoire Hubert Curien UMR 5516 F-42023 Saint-Etienne France

Nanoparticle assembly, alloying and fragmentation are fundamental processes with significant implications in various fields such as catalysis, materials science, and nanotechnology. Understanding these processes under fast heating conditions is crucial for tailoring nanoparticle properties and optimizing their applications. For this, we employ molecular dynamics simulations to obtain atomic-level insights into nanoparticle behavior.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!