In regions highly dependent on fossil fuels imports, biomethane represents a promising biofuel for the transition to a bio-based circular economy. While biomethane is typically produced via anaerobic digestion and upgrading, biomethanation of the synthesis gas (syngas) derived from the gasification of recalcitrant solid waste has emerged as a promising alternative. This work presents a comprehensive and in-depth analysis of the state-of-the-art and most recent advances in the field, compiling the potential of this technology along with the bottlenecks requiring further research. The key design and operational parameters governing syngas production and biomethanation (e.g. organic feedstock, gasifier design, microbiology, bioreactor configuration, etc.) are critically analysed.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.biortech.2022.127436 | DOI Listing |
Microb Biotechnol
December 2024
Institute of Process Engineering in Life Sciences 2: Electro Biotechnology, Karlsruhe Institute of Technology - KIT, Karlsruhe, Germany.
Pyrolysis of lignocellulosic biomass commonly produces syngas, a mixture of gases such as CO, CO and H, as well as an aqueous solution generally rich in organic acids such as acetate. In this study, we evaluated the impact of increasing acetate shock loads during syngas co-fermentation with anaerobic microbiomes at different pH levels (6.7 and 5.
View Article and Find Full Text PDFBioresour Technol
February 2024
Department of Water Technology and Environmental Engineering, Faculty of Environmental Technology, University of Chemistry and Technology Prague, Technicka 1905, 166 28 Prague, Czech Republic.
Syngas fermentation to acetate offers a promising solution for its valorisation, particularly when syngas contains a high N concentration, which otherwise impedes the utilisation of syngas biomethanation gaseous product in cogeneration or upgrading units. In this study, continuous lab-scale syngas fermentation assessing the effects of acidic pH and psychrophilic conditions (28 °C and 20 °C) on bioconversion efficiency and anaerobic consortium diversity was studied. The results showed that as temperature and pH decrease, acetate yield increases.
View Article and Find Full Text PDFTop Catal
May 2023
Institute of Materials Chemistry, Technische Universität Wien, Getreidemarkt 9/BC/01, 1060 Vienna, Austria.
Syngas can be produced from biomethane via Partial Oxidation of Methane (POM), being an attractive route since it is ecofriendly and sustainable. In this work, catalysts of Ni supported on MgO-ZrO solid solutions, prepared by a one-step polymerization method, were characterized by HRTEM/EDX, XRD, XPS, H-TPR, and in situ XRD. All catalysts, including Ni/ZrO and Ni/MgO as reference, were tested for POM (CH:O molar ratio 2, 750 ºC, 1 atm).
View Article and Find Full Text PDFBioresour Technol
May 2023
Univ Lyon, INSA Lyon, DEEP, EA7429, 69621 Villeurbanne, France.
Syngas biomethanation is a promising technology for waste to energy conversion. However, it had not yet been tested at high syngas flow rates. The aim of this study was to assess the possibility for syngas biomethanation to reach high methane productivity at higher syngas inflow rate.
View Article and Find Full Text PDFWaste Manag
May 2023
Univ Lyon, INSA Lyon, DEEP, EA7429, 69621 Villeurbanne, France. Electronic address:
Syngas biomethanation is a promising technology in the process chain converting wastes to methane. However, gas-liquid mass transfer is a limiting factor of the biomethanation process. To reach high methane productivity, increasing the pressure is an interesting strategy to improve mass transfer.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!